background image

5

Following is a list of available parts and supplies which may be purchased separately. Please refer to the cover for contact and model 

identification information.

Replacement Parts

 

Turntable

 

Turntable support and rollers

 

Turntable hub

 

Grease filter

 

Charcoal filter

 

Cooktop light bulb

 

Cavity light bulb

Cleaning Supplies

 

Heavy Duty Degreaser

 

affresh

®

 Kitchen Appliance Cleaner

 

affresh

®

 Stainless Steel Cleaner

 

affresh

®

 Stainless Steel Wipes

First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call, 

refer to the warranty page in this manual and scan the code with your mobile device, or visit 

www.whirlpool.com/product_help.

Contact us by mail with any questions or concerns at the address below:

Whirlpool Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

If you experience

Recommended Solutions

Microwave oven will

not operate

Check the following:

 

Household fuse or circuit breaker -

 If a household fuse has blown or a circuit breaker has tripped, replace 

the fuse or reset the circuit breaker. If the problem continues, call an electrician.

 

Magnetron - 

Try to heat 1 cup (250 mL) of cold water for 2 minutes at 100% cooking power. If water does 

not heat, try the steps in the bullets below. If microwave oven still does not operate, call for service.

 

Door -

 Firmly close door. On some models, if a packaging spacer is attached to inside of the door, remove 

it, then firmly close door.
If a message about the door appears in the display, the door has been closed for 5 minutes or more without 

the microwave oven being started. This occurs to avoid unintended starting of the microwave oven. Open 

and close the door, then start the cycle.

 

Control - 

Make sure control is set properly. Make sure Control Lock is off. Make sure Demo Mode (on some 

models) is off.

Arcing in the

microwave oven

Check the following:

 

Soil buildup -

 Soil buildup on cavity walls, microwave inlet cover, cooking rack supports, and area where 

the door touches the frame can cause arcing. See “General Cleaning” in “Microwave Oven Care” section.

Turntable alternates

rotation directions

 

This is normal and depends on motor rotation at the beginning of the cycle.

Display shows

messages

 

A flashing “:” or “PF” means there has been a power failure. Reset the clock.

 

A letter followed by a number is an error indicator. Call for assistance.

Fan running during

cooktop usage

 

This is normal. The microwave oven’s cooling fan (on some models), which is separate from the vent 

fan, automatically comes on during microwave oven operation to cool the microwave oven. It may also 

automatically come on and cycle on and off to cool the microwave oven’s controls while the cooktop below 

is being used.

Radio, TV or 

cordless phone 

interference

Check the following:

 

Proximity -

 Move the receiver away from the microwave oven, or adjust the radio or TV antenna.

 

Soil -

 Make sure the microwave oven door and sealing surfaces are clean.

 

Frequency -

 Some 2.4 GHz-based cordless phones and home wireless networks may experience static or 

noise while microwave oven is on. Use a corded phone, a different frequency cordless phone, or avoid using 

these items during microwave oven operation.

ACCESSORIES

PROBLEM SOLVER

Содержание UMV1160CW3







Отзывы: