Whirlpool SinkSpa LJD1306L, Руководство пользователя

Страница: 15 / 24

PRODUCT OPERATION
USING THE SINK
1. Turn the torque knob and lower the basket
strainer.
2. Fill the sink with water. IMPORTANT: Do
not operate the pump without water in the
sink, otherwise the pump could be dam-
aged.
3. Press the pneumatic On/Off pushbutton to
turn the pump on. The water in the tub will
begin to circulate.
4. Adjust the Speed Control knob to High,
Medium, or Low, depending on the amount
of circulation desired.
5. Add a low-sudsing detergent, depending
on the load.
6. Place the clothing to be cleaned into the
sink.
THE SPEED CONTROL
The speed control is a 3-position air control that
introduces outside air into the pump return port
to reduce or increase the water flow. The Low
setting increases the air input to reduce water
flow. The higher settings decrease the air input
to increase the water flow.
Torque Knob
On/Off Pushbutton
Speed Control
CLEANING THE FILTER
1. Unscrew the filter cover and remove it.
2. Clean any lint or other debris from the
screen with running water.
3. Replace the screen and reinstall the cover.
NOTE: Do not overtighten the screw or
you will deform the cover.
THE TIMER
The 10-minute timer is electronically controlled
and is operated by a pneumatic On/Off
pushbutton. If the timer is interrupted during
the 10-minute cycle, pressing the On/Off
pushbutton will begin another 10-minute cycle.
Filter Screen
Filter
3-1