background image

12

Unusual sounds

Has the dryer had a period of non-use? 
If the dryer hasn’t been used for a while, there may be a 
thumping sound during the first few minutes of operation. 

Is it a gas dryer? The gas valve clicking is a normal operating 
sound.

Lint on load

Is the lint screen clogged? 
Clean lint screen. Check for air movement.

Is load properly sorted?
Sort lint givers (towels, chenille) from lint takers (corduroy, 
synthetics). Also sort by color.

Is the load too big or too heavy?
Dry smaller loads so lint can be carried to the lint screen.

Was the load overdried?
Use correct dryer settings for load type. Overdrying can 
cause lint-attracting static electricity. See “Drying, Cycle and 
Temperature Tips.”

Was paper or tissue left in pockets?

Is pilling being mistaken for lint?
Pilling (surface fuzz) is caused by normal wear and 
laundering.

Stains on load or color change

Was dryer fabric softener properly used?
Add dryer fabric softener sheets at the beginning of the cycle 
when the load is cold. Do not add fabric softener sheets to a 
warm load.

Were items soiled when placed in the dryer?
Items should be clean before being dried.

Were items properly sorted?
Sort light colors from dark colors. Sort colorfast items from 
noncolorfast items.

Items shrinking

Was the dryer overloaded?
Dry smaller loads that can tumble freely.

Did the load overdry? 
Check the manufacturer’s care label. Match dryer setting to 
load type. See “Drying, Cycle and Temperature Tips.”

Loads are wrinkled

Was load removed from dryer at the end of the cycle?

Was dryer overloaded? 
Dry smaller loads that can tumble freely.

Did load overdry? 
Check the manufacturer’s care label. Match dryer setting to 
load type. See “Drying, Cycle and Temperature Tips.”

Odors

Have you recently been painting, staining or varnishing in 
the area where your dryer is located?
If so, ventilate the area. When the odors or fumes are gone 
from the area, re-wash and dry the clothing.

If the dryer is electric, is it being used for the first time?
The new electric heating element may have an odor. The odor 
will be gone after the first cycle.

If the dryer is gas, there may be a gas leak. 
Turn off the gas supply line, leave your house and then call 
your local gas company. 

Garment damage

Check the following: 
Were zippers, snaps, and hooks left open?

Were strings and sashes tied to prevent tangling?

Were care label instructions followed?

Were items damaged before drying?

Содержание Roper RES7646JQ0















Отзывы: