Manual abstract:
Approved Built-In Oven and Electric Cooktop Combinations A B C C F D E G H A. 24" (61 cm) cabinet depth B. 25" (63.5 cm) countertop depth C.
Recommended oven and cooktop junction box locations D. Allow /" (1.6 cm) for oven trim to overlap on each side. E. 27¾" (70.5 cm) minimum cutout height
F.
36" (91.4 cm) from cabinet base to countertop G. 4/" (11.7 cm) from floor H. See Cutout Dimensions chart.
CUTOUT DIMENSIONS Oven Size 24" (61 cm) 27" (68.6 cm) 30" (76.2 cm) 36" (91.4 cm) Oven Cutout Dimension 22¹/" (57.2 cm) 25¹/" (64.
8 cm) 28½" (72.4 cm) 34¹/" (87.6 cm) For the approved model number combinations, refer to the undercounter label located on top of the oven chassis and on
the bottom of the cooktop burner box. NOTE: For undercounter installation, it is recommended that the junction boxes for oven and cooktop be located in the
adjacent right or left cabinet. A 1" (2.5 cm) minimum diameter hole should have been drilled in the upper rear right or left corner of the side wall surface to
pass the appliance cable through to the junction box. On models with Steam-Assist, it will be necessary to drill a ½" (1.3 cm) minimum diameter hole in the
upper right or left rear corner of the side wall to pass the water supply tubing through to the undersink water filter. If water supply tubing hole is drilled on
the same side as the oven cable hole, a minimum of 2" (5.1 cm) is required between the 2 holes.
W10373101A Approved Built-In Oven and Induction Cooktop Combinations A B C C F D E G H A. 24" (61 cm) cabinet depth B. 25" (63.5 cm) countertop
depth C. Recommended oven and cooktop junction box locations D. Allow /" (1.6 cm) for oven trim to overlap on each side. E. 27¾" (70.5 cm) minimum
cutout height F.
36" (91.4 cm) from cabinet base to countertop G. 3/" (9.2 cm) from floor H. See Cutout Dimensions chart.
CUTOUT DIMENSIONS Oven Size 24" (61 cm) 27" (68.6 cm) 30" (76.2 cm) Oven Cutout Dimension 22¹/" (57.2 cm) 25¹/" (64.8 cm) 28½" (72.
4 cm) For the approved model number combinations, refer to the undercounter label located on top of the oven chassis and on the bottom of the cooktop
burner box. NOTE: For undercounter installation, it is recommended that the junction boxes for oven and cooktop be located in the adjacent right or left
cabinet. A 1" (2.5 cm) minimum diameter hole should have been drilled in the upper rear right or left corner of the side wall surface to pass the appliance
cable through to the junction box. On models with Steam-Assist, it will be necessary to drill a 1" (1.3 cm) minimum diameter hole in the upper right or left
rear corner of the side wall to pass the water supply tubing through to the undersink water filter. If water supply tubing hole is drilled on the same side as the
oven cable hole, a minimum of 2" (5.1 cm) is required between the 2 holes. 2 Approved Built-In Oven and Gas Cooktop Combinations A B C D E F G I J L K
E D H M N A. 24" (61 cm) cabinet depth B.
1" (2.5 cm) clearance to bottom of countertop C. 25" (63.5 cm) countertop depth D. Recommended oven junction box locations E. 1" (2.5 cm) clearance to
cabinet F. 27¾" (70.5 cm) minimum cutout height G. Allow /" (1.
6 cm) for oven trim to overlap on each side. H. 36" (91.4 cm) from cabinet base to countertop I. Gas line through wall 10¹/" (26.
7 cm) to center of cutout J. 3¼" (8.3 cm) K. Gas line through floor 10½" (26.7 cm) to center of cutout L.
3½" (8.9 cm) M. 4/" (11.7 cm) from floor N. See Cutout Dimensions chart. CUTOUT DIMENSIONS Oven Size 24" (61 cm) 27" (68.6 cm) 30" (76.2 cm) 36"
(91.4 cm) Oven Cutout Dimension 22¹/" (57.2 cm) 25¹/" (64.
8 cm) 28½" (72.4 cm) 34¹/" (87.6 cm) For the approved model number combination refer to the undercounter label located on top of the oven chassis. NOTE:
For undercounter installation, it is recommended that the junction box for oven be located in the adjacent right or left cabinet. A 1" (2.5 cm) minimum
diameter hole should have been drilled in the upper rear right or left corner of the side wall surface to pass the appliance cable through to the junction box.
On models with Steam-Assist, it will be necessary to drill a ½" (1..
Your user manual
WHIRLPOOL RBS305PV
