Whirlpool PACHW2900CO, Инструкция по эксплуатации

Страница: 7 / 20

- 7 -
SAFETY INSTRUCTIONS
Explanation of symbols displayed unit.
WARNING
This symbol shows that this appliance uses a flammable
refrigerant.
If the refrigerant is leaked and exposed to an external ignition
source, there is a risk of fire
CAUTION
This symbol shows that the operation manual should be read
carefully
CAUTION
This symbol shows that a service personnel should be handling
this equipment with reference to the installation manual
CAUTION
This symbol shows that information is available such as the
operating manual or installation manual
SAFETY INSTRUCTIONS FOR SERVICING APPLIANCE WITH SPESIFIC REFRIGERANT
• Download the complete manual for detailed installation, servicing, maintenance and
reparing methods on docs.whirlpool.eu.
• Do not use means to accelerate the defrosting process or to clean, other than those
recommended by the manufacturer.
• The appliance shall be stored in a well-ventilated area where the room size
corresponds to the room area as specified for operation; without continuously
operating ignition sources (such as; open flames, an operating gas appliance or an
operating electric heater).
• Do not pierce or burn. Be aware that the refrigerants may not contain an odor.
Any person who is involved with working on or breaking into a refrigerant circuit
should hold a current valid certificate from an industry-accredited assessment
authority, which authorizes their competence to handle refrigerants safely in
accordance with an industry recognized assessment specification. Servicing shall only
be performed as recommended by the equipment manufacturer. Maintenance and
repair requiring the assisstance of other skilled personnel shall be carried out under the
supervision of the person competent in the use of flammable refrigerants. Appliance
shall be installed, operated and stored in a room with a floor area larger than 11 m
2
. The
installation of pipe-work shall be kept to a room with a floor area larger than 11 m
2
. The
pipe-work shall be compliance with national gas regulations. The maximum refrigerant
charge amount is 0.22 kg.
When flared joints are reused , the flare part shall be re fabricated.
1. Transport of equipment containing flammable refrigerants shall be compliant with the
transport regulations.
2. Marking of equipment using signs shall be compliant with local regulations.
3. Disposal of equipment using flammable refrigerants shall be compliant with national
regulations.