19. MEMORY FUNCTION
22. OTHER SPECIFICATIONS
(1) In standby state , if the set clock digital tube displays current time, the icon "
:
" would
flash; otherwise, it shows "
0:00
".
(2) In setting function state, LED displays corresponding setting.
(3) In working or pause state, LED displays surplus cooking time.
When the cooking is over, the buzzer will sound 5 "beep" to alert user the cooking is finished.
21. COOKING END REMINDING FUNCTION
20. INQUIRING FUNCTION
(1) In cooking state, press "
", the LED will display clock for three
seconds.
the current microwave power will be displayed.
After three seconds, the oven will turn back
to the previous state. In multi-stage state,
the inquiring way can be done by the
same way as above.
(1) Press "
" to choose memory 1-3 procedure. The LED will display 1,2,3.
set the procedure. Only one or two stages can be set.
Example: To set the following procedure as the second memory, that is memory 2.
To cook the food with 80% microwave power for 3 minutes and 20 seconds.
The steps are as follow:
a. In waiting state, press "
" twice, stop pressing until the screen displays "2".
memory 2 and operated.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the
procedure need to reset.
f. If you want to run the saved procedure, in waiting state, press "
" twice,
(2) If the procedure has been set, press "
" to use it. If not, continue to
(3) After finishing the setting, press "
" once to save the procedure.
" again, it will start cooking.
b.Press "
" once,then press "3","2","0" in order.
c. Press "
" once, "PL10" displays, then press "8" and "PL8" displays.
If you press "
" again, the procedure will be saved as the
d. Press "
" to save the setting. Buzzer sounds once then
screen displays "2", then press "
" to run.
(2) In the microwave cooking state, press "
" to inquire microwave power
level, and
If press "
LED displays " "
2 .
21
