S E R V I C E
Whirlpool Europe
MT 263/WH
27.01.1998 / Page 5
Customer Service
8538 263 53291
Doc. No: 4812 714 12124
Description of the Display Symbols
a)
The Food Class Bar indicates the food class and is lit when auto defrost, auto crisp, auto crisp reheat or
auto crisp cook is selected.
b)
"AUTO" is lit when auto defrost, auto reheat, beverage or auto crisp is selected.
c)
"SENSE" or ”boil” is displayed when an auto function is started.
”HEAT” or ”COOK” is displayed when Auto Crisp Reheat or Auto Crisp Cook.
”JET” is displayed when using maximum MW power.
d)
Personal preference for the auto functions is indicated by "-2", "-","+", "+2". When no personal preference
is chosen, all are turned off.
e)
The defrost symbol is lit during manual or auto defrost.
f)
The beverage symbol is lit when Beverage is selected.
g)
The reheat symbol is lit when Auto Reheat, Auto Crisp Reheat, Auto Crisp Cook or Auto Boil is selected.
h)
The grill symbol is lit when a function using the grill element is selected. The lower part of the symbol
blinks during cooking.
i)
The MW symbols are lit when a function using microwaves is selected.
j)
The fan symbol indicates that the convection function is in operation.
k)
The pan symbol is lit when a crisp function is selected, indicating that the crisp pan must be used.
l)
The plate symbol is lit when a cooking function is selected, indicating whether the turn table is rotating
or not. It flashes
rapidly if the turntable is switched off when it must be rotating.
m)
The Power-/Temp-/Process bar indicates:
·
MW power. Jet is indicated by a rolling bar.
·
the temperature in convection heating.
·
how far the process has advanced when using the auto functions.
Real time clock
Time is set by pressing the CLOCK button. Set the hours with the timer knob. Press the CLOCK button again
and set the minutes with the timer knob. Finally, press the CLOCK button again to clear the seconds and start
the clock.
Cooking time
The cooking time is set with the timer knob. The maximum cooking time that can be set is 90 minutes.
Microwave power
To adjust the microwave power, press the POWER buttons. The current power level is displayed in Watts for 2
seconds. The power level is stepped with the POWER buttons, while the power level is displayed. If POWER is
pressed when the oven is in stand by, the power level is set to 750 W. The oven is started with the START
button.
JET
If the oven is in stand by and the START button is pressed, cooking is started immediately at full power. If the
oven is already cooking, the timer is incremented 30 seconds each time the button is pressed, but the power
setting is not affected.
Auto Defrost (El Crisp and Crisp Convection only)
Press the AUTO DEFROST button until the wanted Food Class is selected. See Table . Turn the rotacoder until
the shown weight corresponds as close as possible to the weight of the food. Press the START button. The
time needed will be calculated and the oven starts.
Note: The turntable must be rotating when using this function.
