11
Adding liquid chlorine bleach
Use your washer’s liquid chlorine bleach
dispenser to add bleach to the wash load.
Always measure liquid chlorine bleach. Do
not guess. Never use more than 1 cup
(250 mL) for a full load. Use less with lower
water level settings. Follow manufacturer’s
directions for safe use. Use a cup with a
pouring spout to avoid spilling.
1.
Load the washer.
2.
Pour measured chlorine bleach carefully
into the dispenser. Do not let bleach
splash, drip, or run down into washer
basket. Undiluted bleach will damage any
fabric it touches.
3.
Start the washer. Bleach will be diluted
automatically during wash part of cycle.
Adding liquid fabric softener
1.
Add detergent and load clothes into
the basket.
2.
Pour liquid fabric softener into the dis-
penser using the amount recommended
on the package. Avoid dripping or spilling
any fabric softener on the load.
3.
Dilute fabric softener with warm water.
Fill dispenser with warm water until liquid
reaches the cross bar in the opening.
4.
Start the washer. Diluted fabric softener
will be added to the load during the
final rinse.
NOTE:
Do not stop the washer before the
rinse part of the cycle begins. Staining
can occur.
5.
Flush dispenser periodically with warm
water, as illustrated.
•
To remove the dispenser, grasp the top
of the dispenser with both hands.
Squeeze and push upward with thumbs
to remove.
•
Clean dispenser by holding under water
faucet. Replace after cleaning.
NOTE:
Do not wash clothes with this
dispenser removed. Do not add detergent
or bleach to dispenser. The dispenser is
for liquid fabric softener use only.
O P E R A T I N G Y O U R W A S H E R
NOTE:
Do not use this dispenser to add
powdered chlorine or color safe bleach to
your wash load. The dispenser is for liquid
chlorine bleach use only.
