Whirlpool LSA 1300, Руководство пользователя

Страница: 17 / 24

Whirlpool | User Manual
17
Cleaning and Maintenance
Winter Storage Care
IMPORTANT: To avoid damage, install and store
washer where it will not freeze. Because some
water may stay in hoses, freezing can damage
washer. If storing or moving during freezing
weather, winterize your washer.
To winterize washer:
• Shut off both water taps, disconnect and drain
water inlet hoses.
• Put 1 qt. (1 L) of R.V.-type antifreeze in basket and
run washer on RInSE & SPIn cycle for about 30
seconds to mix antifreeze and remaining water.
• unplug washer or disconnect power.
Reinstalling / using Washer Again
To reinstall washer after non-use, vacation,
winter storage or moving:
• Refer to ‘Installation Instructions’ to locate,
level, and connect washer.
• Before using again, run washer through the
following recommended procedure:
To use washer again:
• Flush and reconnect water inlet hose and drain
hose. Turn on the water tap.
• Plug in washer or reconnect power.
• Run washer through ‘Bed Linen’ cycle to clean
washer and remove antifreeze, if used. use
only HE High Efficiency detergent. use half the
manufacturer’s recommended amount for a
medium-size load.
transporting your Washer
• Shut off water tap. Disconnect and drain the
water inlet hose.
• If washer will be moved during freezing weather,
follow ‘Winter Storage Care’ directions before
moving.
• Disconnect drain hose from back of washer.
• unplug power cord.
• Place inlet hose and drain hose inside washer
basket.
• Drape power cord over edge and route/tape it
on to the rear side of the washer.
• Place packing tray from original shipping
materials back inside washer. If you do not have
packing tray, place heavy blankets or towels
into the basket opening. Close lid and place
tape over lid and the front of washer. Keep lid
taped until washer is placed in the location.
Electric shock Hazard
Electrically earth this appliance.
Do not use an extension cord or an electrical
portable outlet device.
Failure to follow these instructions can result
in death, fire or electric shock.
Hazardous Substances
Components used in the manufacturing of
this washing machine contains traces of
Lead and Hexavalent Chromium. Contact
with the washing machine during the life of
the product does not endanger health or
safety to humans or any living creature.
Specifications
specification lsa1300
power supply 220v ac, 60 hz
capacity 13kg dry linen
type of wash system agitator
spin speed 720-740 rpm
net Weight (kg) 44.2
input power 770 W at 220v
dimensions (Wxdxh) 620x670x1090 in mm
Water pressure 20kpa(3psi) - 686kpa(100psi)
Machine class
class 1
NOTE: Due to continuous R&D, specifications may change
without prior notice.
Care for the environment
Washer disposal
By ensuring this product is
disposed off correctly, you
will help avoid potential
negative consequences
for the environment and
human health, which could
otherwise be caused
by inappropriate waste
handling of this product.
The symbol on the product,
or on the documents
accompanying the product,
indicates that this appliance
may not be treated as household waste.
Instead it should be handed over to the
applicable collection point for recycling of
electrical and electronic equipment.
Disposal must be carried out in accordance
with local environmental regulations for
waste disposal.
For more detailed information about
treatment, recovery and recycling of this
product, please contact your local city office,
your household waste disposal service or the
shop where you purchased the product.