Whirlpool LAB2700ML Скачать руководство пользователя страница 3

3

WASHER SAFETY

You can be killed or seriously injured if you don't immediately 
 

You

 

can be killed or seriously injured if you don't follow 

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety 
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

■  

Read all instructions before using the washer.

 

Do not wash articles that have been previously

 

cleaned

in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, other flammable, or explosive
substances as they give off vapors that could ignite or
explode.

 

Do not add gasoline, dry-cleaning solvents, or other

flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or
explode.

 

Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not been
used for such a period, before using the washing
machine, turn on all hot water faucets and let the water
flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during
this time.

 

Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is used
near children.

 

Before the washer is removed from service or

discarded,

remove the door or lid.

 

Do not reach into the washer if the drum, tub or agitator is

moving.

 

Do not install or store the washer where it will be exposed to

the weather.

 

Do not tamper with controls.

 

Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in
published user-repair instructions that you understand and
have the skills to carry out.

 

See “Electrical Requirements” for grounding instructions.

WARNING:

To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,

including the following:

Содержание LAB2700ML











Отзывы: