Louver Function - Manual (Left / Right)
Left and right louver function to provide selection of wide airflow distribution of
degree, or concentrated airflow.
up to 120
Ionizer Function
Stop: when press “Stop” button or pre-set time runs over, the louver will return to 0 degree
position (auto louver will stop operate).
Louver Function - Auto (Up / Down)
→
【
Function Descriptions
】
stop at either angle
First start
90degree
swing within 45~120 degrees
swing within 45~120 degrees
0 degree
stop and shut off
stop at either angle
automatically record the angel setting last time
Restart
Start: press “Delay Vent” button, LCD “Vent” function displays, and starts running. The default
mode will run 15 minutes before it stops.
Stop: press “Stop” button, and LCD “Vent” function and timer will turn off, and the machine will
stop automatically.
Delay Vent Function
-
14
-
Start: default running the On and Off operation, same with Fan. If it is ON, LCD “
icon will displaced and
icon will disappear when it is off. When it is off, the swing
function is invalid, and the louver will resume to 0 degree position. When it is fan
mode, the default is 90 degree louver position.
”
“ ”
Auto Swing: when the fan is running, press the “Swing” button, the louver will turn
from 90 degree position to swing ranging from 45 degree to 120 degree. Press “Swing”
button again, auto louver function will stop, and if you press it again, it will run
auto-swing again.
Start: default running the “on” and “off” operation, same with Fan. If fan is ON, Ionzier
icon
will turn on. If fan is off,
the icon
will turn off
Ionizer function will be invalid.
“ ”
“ ”
Stop: when Ionizer is running, pressing the “Ionizer” button will stop the function, and
LCD display
will turn off. Press the “Ionizer” button again, Ionizer will turn on
and the LCD display
will turn on as well.
the
“ ”
again,
“ ”
