20
5. Press TEMP/TIME “up” or “down” arrow pad to enter the
length of time to cook.
6. Press START TIME. The start time/delay oven indicator light
will light up.
7. Press TEMP/TIME “up” or “down” arrow pad to enter the time
of day to start.
8. Press START.
When the start time is reached, the oven will automatically
turn on. The temperature and/or time settings can be
changed any time after pressing START by repeating steps
2-7. When the set cook time ends, the oven will shut off
automatically and “End” will appear on the display.
9. Press OFF/CANCEL or open the oven door to clear the
display.
Sequence Programming
(on some models)
Sequence Programming allows you to program up to 4 cooking
functions at one time. Other oven functions, such as the Timer
and Warming Drawer, may be used when a sequenced Program
is running.
All steps of a sequenced program must be programmed with a
stop time. If a stop time is not entered for a step in the sequence
program, and the ADD STEP pad is pressed, 3 tones will sound
prompting you to enter a stop time.
Sequence Programming takes precedence over any
nonsequenced cook function. For example, if an untimed Bake
function is in process and a sequence program is started, the
untimed Bake function will be canceled, and the program
sequence will start.
When using Sequence Programming, STEPS 1 2 3 4 will show on
the oven display.
Example - Sequence Programming
To Program the First Step of the Sequence:
1. Press BAKE or any other desired Cooking Options key.
“SET TEMP OR TIME OR PUSH START” will appear on the
oven display.
2. Press the TEMP “up” or “down” arrow pad (if desired) to
select a temperature other than the one displayed.
“SET COOK TIME OR PUSH START” will appear on the oven
display.
3. Press the HOUR and/or MIN “up” or “down” keys to set the
time of day for the first cooking function to begin. For
example, 1:00.
“PUSH START OR ADD STEP” will appear on the oven
display.
4. Press ADD STEP.
NOTE: If Start is pressed after only 1 sequence has been
programmed, a regular cooking mode will start. For example, if
you choose Bake as your first step, and Start is pressed, the
oven will begin a normal baking cycle. After Start has been
pressed, additional steps cannot be added to the sequencing. If
additional steps are desired, press OFF/CANCEL. This will exit
the sequence program, and the oven display will return to just the
time of day.
To Program Steps 2, 3 and 4 of the Sequence:
1. Press ADD STEP.
“SELECT COOK OPTION” will appear on the display.
2. Press CHOICE BAKE
®
or any other desired Cooking Options
key.
3. Press the TEMP “up” or “down” arrow pad (if desired) to
select a temperature other than the one displayed.
4. Press the HOUR and/or MIN “up” or “down” keys to set the
time of day for the first cooking function to begin. For
example, 1:35.
“PUSH START OR ADD STEP” will appear on the oven
display.
5. Continue repeating steps 1 through 4 until the maximum
number of sequences have been set. You can program up to
4 cooking functions within the sequence.
6. Press START to begin sequence.
If you choose to press Start, your program sequence will
begin. Additional steps cannot be added to the sequence
once Start has been pressed.
To Review/Modify Programmed Sequence:
If program steps are partially or completely programmed, yet the
sequence has not been started, the programmed cook functions
can be reviewed.
1. Press REVIEW STEPS. Step 1 will appear in the display.
Subsequent presses of REVIEW STEPS will cause display of
programmed steps in order.
“STEP” and “REVIEW” will appear on the display. The
number of the displayed step will flash. A recalled step will
remain lit on the display for 5 minutes if no further action is
taken.
2. If fewer than four steps have been programmed, press
REVIEW STEPS repeatedly until the last programmed step is
displayed, then press ADD STEP if it is desired to program an
additional step.
While a step is recalled, a cook function pad can be used to
change the function, or the TEMP “up” or “down” arrow pad
can be used to change the set temperature.
The start time and stop time can be changed by pressing the
HR or MIN “up” or “down” arrow pads.
Changing the start time and stop time of a step will
automatically change the start times and stop times of all
subsequent programmed cook functions.
3. After Review/Modification of the programmed sequence is
complete, press START to begin sequence.
To Modify Sequence Programming:
1. Press DELETE STEP.
The last step of the sequence will be canceled, and the step
prior to the canceled sequence will show on the display for
either review or modification.
If the programmed sequence has not been started, see “To
Program Steps 2, 3 and 4 of the Sequence” section to
program a step to replace the canceled cook function.
2. Press START.
The first step will show on the display and the program
sequence will begin.
Changes can be made during a programmed cook function;
however, changes cannot be made after a programmed cook
function has been completed.
If at any time during an active sequenced program ADD STEP
is pressed, 3 tones will sound.
