Whirlpool Gold GS5DHAXVY Скачать руководство пользователя страница 8

8

The Water Dispenser

IMPORTANT: Dispense enough water every week to maintain a 
fresh supply.

To Dispense Water:

1. Press a sturdy glass against the water dispenser lever.

2. Remove the glass to stop dispensing.

The Ice Dispenser

Ice dispenses from the ice maker storage bin in the freezer when 
the dispenser lever is pressed. The dispensing system will not 
operate when the freezer door is open. To turn off the ice maker, 
see “Ice Maker and Storage Bin.”
Your ice maker can produce both crushed and cubed ice. Before 
dispensing ice, select which type of ice you prefer by pressing the 
ICE button. 
The display screen indicates which type of ice is selected.

For crushed ice, cubes are crushed before being dispensed. This 
may cause a slight delay when dispensing crushed ice. Noise 
from the ice crusher is normal, and pieces of ice may vary in size. 
When changing from crushed to cubed, a few ounces of crushed 
ice will be dispensed along with the first cubes.

To Dispense Ice:

1. Press the button to select the desired type of ice.

2. Press a sturdy glass against the ice dispenser lever. Hold the 

glass close to the dispenser opening so ice does not fall 
outside of the glass. 
IMPORTANT: You do not need to apply a lot of pressure to the 
lever in order to activate the ice dispenser. Pressing hard will 
not make the ice dispense faster or in greater quantities.

3. Remove the glass to stop dispensing.

NOTE: Ice may continue to dispense for up to 10 seconds 
after removing the glass from the lever. The dispenser may 
continue to make noise for a few seconds after dispensing.

The Dispenser Light (on some models)

When you use the dispenser, the light will automatically turn on. 
If you want the light to be on continuously, you may choose either 
ON or DIM. The display screen indicates which mode is selected. 

ON: Press LIGHT to turn the dispenser light on. 
DIM: Press LIGHT a second time to select DIM mode. The 
dispenser light will remain on, but at a lower intensity.
OFF: Press LIGHT a third time to turn the dispenser light off.
The dispenser lights are LEDs that cannot be changed. If it 
appears that your dispenser lights are not working, see 
“Troubleshooting” for more information.

The Dispenser Lock (on some models)

The dispenser can be turned off for easy cleaning or to avoid 
unintentional dispensing by small children and pets. 
NOTE: The lock feature does not shut off power to the refrigerator, 
to the ice maker, or to the dispenser light. It simply deactivates the 
dispenser controls and levers. To turn off the ice maker, see “Ice 
Maker and Storage Bin.”

Press and hold LOCK for 3 seconds to lock the dispenser. 

Press and hold LOCK a second time to unlock the dispenser.

The display screen indicates when the dispenser is locked. 

Ice Maker and Storage Bin

(on some models)

Turning the Ice Maker On/Off

The On/Off switch is located on the top right-hand side of the 
freezer compartment.

To turn on the ice maker, slide the control to the ON (left) 
position.

To manually turn off the ice maker, slide the control to the OFF 
(right) position.

NOTE: Your ice maker has an automatic shutoff. The ice maker 
sensors will automatically stop ice production, but the control will 
remain in the ON (left) position.
REMEMBER:

Allow 24 hours to produce the first batch of ice. Discard the 
first three batches of ice produced.

The quality of your ice will be only as good as the quality of the 
water supplied to your ice maker. Avoid connecting the ice 
maker to a softened water supply. Water softener chemicals 
(such as salt) can damage parts of the ice maker and lead to 
poor quality ice. If a softened water supply cannot be avoided, 
make sure the water softener is operating properly and is well 
maintained.

Do not use anything sharp to break up the ice in the storage 
bin. This can cause damage to the ice container and the 
dispenser mechanism.

Do not store anything on top of or in the ice maker or storage 
bin.

CRUSHED

CUBED

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

WARNING

ON

DIM

OFF

LOCKED

UNLOCKED

Содержание Gold GS5DHAXVY





































Отзывы: