5
5.
Slide damper assembly into the damper plate by placing the
long tab of the assembly under the raised slot of the damper
plate, as shown
.
6.
Attach the damper plate and assembly to the back of the
microwave oven, as shown, and secure with screws removed
in Step 1.
Roof Venting Installation Only
1.
Repeat Step 1 from “Wall Venting Installation Only.”
2.
Repeat Step 2 from “Wall Venting Installation Only.”
3.
Repeat Step 3 from “Wall Venting Installation Only.”
4.
Rotate air deflector so that deflector feet face the bottom of
the microwave oven, and then slide air deflector into the back
of the microwave oven as shown, making sure its exhaust port
(open end) aligns with the microwave oven exhaust port.
5.
Slide damper plate under the retaining tabs. Save screws for
later use.
A. Damper assembly
B. Damper plate
C. Long tab
D. Raised slot
A. Back of microwave oven
B. Damper plate
C. Damper assembly
D. Screws
A B C D
A B C D
A. Microwave oven exhaust port
B. Air deflector exhaust port (open end)
C. Deflector feet
A. Retaining tabs
A
C
B
A
