background image

Health & Safety guide

4

 Use only new hoses to connect the appliance to 

the water supply . The old hose-sets should not be 

reused .

 The supply water pressure must be in the 

01-1 Mpa range .

ELECTRICAL WARNINGS

 It must be possible to disconnect the appliance 

from the power supply by unplugging it if plug is 

accessible, or by a multi-pole switch installed 

upstream of the socket in accordance with the 

wiring rules and the appliance must be earthed in 

conformity with national electrical safety standards . 

 Do not use extension leads, multiple sockets or 

adapters . The electrical components must not be 

accessible to the user after installation . Do not use 

the appliance when you are wet or barefoot . Do not 

operate this appliance if it has a damaged power 

cable or plug, if it is not working properly, or if it has 

been damaged or dropped .

 If the supply cord is damaged, it must be replaced 

with an identical one by the manufacturer, its service 

agent or similarly qualified persons in order to avoid 

a hazard - risk of electric shock .

CLEANING AND MAINTENANCE

 WARNING: Ensure that the appliance is switched 

off and disconnected from the power supply before 

performing any maintenance operation; never use 

steam cleaning equipment - risk of electric shock .

DISPOSAL OF PACKAGING MATERIALS

The packaging material is 100% recyclable and is marked with the recycle 

symbol 

  .

The various parts of the packaging must therefore be disposed of 

responsibly and in full compliance with local authority regulations 

governing waste disposal .

DISPOSAL OF HOUSEHOLD APPLIANCES

This appliance is manufactured with recyclable or reusable materials . 

Dispose of it in accordance with local waste disposal regulations . 

For further information on the treatment, recovery and recycling of 

household electrical appliances, contact your local authority, the 

collection service for household waste or the store where you purchased 

the appliance . This appliance is marked in compliance with European 

Directive 2012/19/EU, Waste Electrical and Electronic Equipment (WEEE) . 

By ensuring this product is disposed of correctly, you will help prevent 

negative consequences for the environment and human health .

The symbol   on the product or on the accompanying documentation 

indicates that it should not be treated as domestic waste but must be 

taken to an appropriate collection center for the recycling of electrical 

and electronic equipment .

Содержание FWL71253W UK




















Отзывы: