8
FUNCTIONS
Rinse hold (option on Spin button)
Avoids automatic spinning of the laundry at the end of the
programme. The laundry remains in the last rinse water and
the programme does not continue.
Suitable for delicate laundry which is not suitable for spinning, or
which should be spun with a lower spin speed. Not suitable for silk.
To end the “Rinse hold” function, choose between:
•
drain the water, no spin:
turn the knob to select spin speed “0”, then press “
Start/
Pause
”: The water will be drained and the programme
ended
•
spin the laundry:
the default spin speed flashes – start the spin cycle by
pressing “
Start/Pause
”.
Or select a different spin speed by turning the knob, press
it to confirm, and press “
Start/Pause
”.
Start delay
Moves the start of your programme to a later time.
Do not use liquid detergent with this function.
• Select programme, temperature and options.
• Press the “
Start delay
” button – the start delay symbol on the
display flashes.
• Turn the knob to select a delay of up to 23 hours, which will be
shown on the display. Confirm by pressing the knob.
• Press “
Start/Pause
” – the countdown for the delay starts. The colon
on the display flashes. The door locks.
• If you have selected Dosing Aid: When you press “
Start/Pause
”, the
washing machine calculates the recommended detergent
amount. Add detergent as indicated on the display (see “Dosing
Aid”). Press “
Start/Pause
” again to start the countdown for the
selected delay period.
• After the delay time has been reached, the washing machine starts
automatically. The display then indicates the remaining
programme duration.
To cancel “
Start delay
”:
• Press “
Start/Pause
” to cancel start delay.
Key lock
Locks the buttons and the knob on the control
panel against unwanted operation.
To lock the buttons:
• The washing machine must be switched on.
• Press and hold the option button until the key symbol on
the display lights up. The knob and the buttons are now
locked. Only “
On/Off
” works.
If you switch the washing machine off and on again, the key
lock remains active until you unlock it.
To unlock the buttons, press and hold the option button
again, until the key symbol on the display goes off.
INDICATORS
Door can be opened.
Failure: Water tap closed.
The washing machine has no/
insufficient water supply.
Failure: Water filter clogged.
Water cannot be drained;
water filter might be blocked
Failure: Call Service.
Refer to Troubleshooting section in
the Use and Care Guide.
In the event of any failures, refer to the Troubleshooting section in
the “Use and Care Guide”.
EN
400010791297
MAINTENANCE AND CLEANING
AND TROUBLESHOOTING
For maintenance and cleaning, and for
troubleshooting, see the
Use and Care Guide
.
The
Use and Care Guide
can be obtained as
follows:
• After-Sales Service; using the phone
number in the warranty booklet
• Download from the Whirlpool Website
http://docs.whirlpool.eu
CONTACTING AFTER-SALES SERVICE
Provide both numbers shown on the service sticker inside the door
when contacting the After-Sales Service team.
http://www.whirlpool.com
The phone number can be found in the warranty booklet.
Whirlpool® Registered trademark/TM Trademark of Whirlpool group of companies -
© Copyright Whirlpool Europe s.r.l. 2014. All rights reserved - http://www.whirlpool.eu
001
n
