TROUBLESHOOTING
35
Off-taste, odor or gray
color in the ice or water
Newly installed refrigerator requires flush
of water system.
Flush the water system. See “Water and Ice Dispensers” for
water system flushing instructions.
Recently installed or replaced plumbing
connections. New plumbing connections
can cause discolored or off-flavored ice
and water.
Discard the ice and wash the ice storage bin. Flush the water
system with 3 gal. (12 L) of water. Allow 24 hours for the ice
maker to make new ice, and discard the first 3 batches of ice
produced.
Using a water supply connection type
other than recommended.
It is recommended to use copper tubing or Whirlpool supply
line, Part Number 8212547RP. See “Connect to Water Line.”
The ice has been stored too long.
Discard ice. Wash ice storage bin. Allow 24 hours for ice
maker to make new ice.
The water has been stored too long.
Dispense at least 1 qt (1 L) of water per week to maintain a
fresh supply.
Odor from stored food has transferred to
the ice.
Use airtight, moisture proof packaging to store food.
There are minerals (such as sulfur) in the
water.
A water filter may need to be installed to remove the minerals.
There is a water filter installed on the
refrigerator.
Gray or dark discoloration in ice may indicate that the water
filtration system needs additional flushing. Flush the water
system after installing and before using a new water filter. See
“Water and Ice Dispensers” for water filter flushing
instructions.
The water filter needs to be replaced.
Replace the disposable water filter at least every 6 months or
when indicated. See “Water Filtration System.”
The water and ice
dispenser will not
operate properly
The refrigerator is not connected to a
water supply or the water supply shutoff
valve is not turned on.
Connect the refrigerator to the water supply and turn the water
shutoff valve fully open.
There is a kink in the water source line
A kink in the water line can reduce water flow from the water
dispenser and result in hollow or irregular shaped ice.
Straighten the water source line.
The refrigerator has just been installed.
Flush and fill the water system. See “Water and Ice
Dispensers.”
The water pressure to the house is not at
or above 35 psi (241 kPa).
The water pressure to the house determines the flow from the
dispenser. See “Water Supply Requirements.”
A reverse osmosis water filtration system
is connected to your cold water supply.
A reverse osmosis water filtration system can decrease water
pressure. See “Water Supply Requirements.”
The water filter may be clogged.
Remove the water filter and operate dispenser. If water flow
increases, your filter is clogged and needs to be replaced. See
“Water Filtration System.”
The water filter is installed incorrectly
Remove the water filter and reinstall. See “Water Filtration
System.”
The refrigerator door or freezer drawer is
not closed completely.
Close the door or drawer firmly. If it does not close completely,
see “The doors will not close completely.”
The refrigerator doors were recently
removed.
Make sure the water dispenser wire/tube assembly has been
properly reconnected at the top of the refrigerator door.
See “Refrigerator Doors and Drawer.”
Ice is clogged in the ice storage bin or ice
is blocking the ice delivery chute.
Remove the ice clogging the storage bin and delivery chute,
using a plastic utensil if necessary. Clean the ice delivery chute
and the bottom of the ice storage bin using a warm, damp
cloth, then dry both thoroughly. To avoid clogging and to
maintain a fresh supply of ice, empty the storage bin and clean
both the storage bin and delivery chute every 2 weeks.
PROBLEM
POSSIBLE CAUSES
SOLUTIONS
Содержание FRENCH DOOR BOTTOM MOUNT REFRIGERATOR
Страница 127: ...NOTES 127 ...
