Whirlpool FM07IDUWA2, Инструкция по эксплуатации

Страница: 51 / 394

4. Connecting the Cable
• Indoor Unit
1) Open the front panel, remove the covering plate by
loosening the screw.
2) Connect the power connecting cord to the indoor
unit by connecting the wires to the terminals on the
control board individually as follows.
3) Secure the power connecting cord on the control
board with cable clamp.
4) Refit the covering plate and tighten the screw.
NOTE: (depending on the model) It is necessary to
remove the cabinet to perform connections with the
indoor unit terminal.
• Outdoor Unit
1) Remove the access door from the unit by loosening the screw. Unscrew the cable clamp, connect the
wires to the terminals on the control board individually in accordance with the indoor unit connection.
2) Secure the power connecting cord on the control board with cable clamp.
3) Refit the access door in the original position and tighten the screw.
NOTE: (depending on the model) It is necessary to remove the cabinet to perform connections with the
indoor unit terminal.
Covering plate
Power Connection
Cable
51
For FM20ODUWA2, there is no indoor unit C, D;
For FM24ODUWA2, there is no indoor unit D;
Front panel
Indoor unit
Terminal (inside)
Cabinet