Whirlpool EveryDrop EDRD101G1W, Инструкция по использованию и уходу

Страница: 10 / 15

8
MINUTES
(4 Gallons)
18
19
FLUSH FILTER
Your EveryDrop™ Water
Dispenser is now ready to use.
Enjoy great-tasting filtered
water at the push of a button.
11
INSTALLATION
12
ENJOY
USE
HOW TO USE THE PRODUCT
The purpose of the EveryDrop TM Water Dispenser is to deliver filtered tap
water when and where you want it. The built-in magnet allows you to attach
the dispenser anywhere on the magnetic surface of your refrigerator.
The EveryDrop
TM
Water Dispenser includes a pull-out Drip Tray that is intended
to catch any drips. The Drip Tray is not intended to support a glass or container.
To use the Water Dispenser, place a glass or container under the Spout.
With your other hand, press the Spout On/Off Button to dispense the water.
Continue pressing the button until your glass or container has the amount
of water you would like. Release the button to stop the water flow. Rated
service flow is 0.5 gpm (1.89 lpm).
NOTE: The Spout On/Off Button is harder to push when water pressure is
applied. For the best experience, press along the raised line on the button face.
NOTE: The Filter Lock/Unlock Knob also controls the water valve. Locking the
knob turns on the flow of water from your water supply to the filter. Unlocking
the knob turns the flow off.
Hold a bucket under the Spout.
Press and hold the Spout
On/Off Button for a total of
eight minutes, emptying your
bucket when necessary. This
will flush out your filter. Repeat
this process every time you
replace your water filter.