background image

11

Using Your Refrigerator

To obtain the best possible results from your refrigerator, it is important that you operate it properly. This section
tells you how to set the controls, remove and adjust the features in your refrigerator, and how to save energy.

Setting the controls

The controls for your refrigerator are located on the
upper rear wall of the refrigerator section. The
FREEZER control regulates the temperature in the
freezer section, and the REFRIGERATOR control
regulates the temperature in the refrigerator section.
When the FREEZER control is turned to off, neither
the REFRIGERATOR nor FREEZER sections will cool.
When you plug the refrigerator in for the first time:

1.

Set the FREEZER control to 4 (recommended
setting). Freezer control settings range from
1 (warmest) to 7 (coldest).

2.

Set the REFRIGERATOR control to 4 (recom-
mended setting). Refrigerator control settings range
from 1 (warmest) to 7 (coldest).

Give the refrigerator 24 hours after connecting to cool
down completely. After that, you can adjust the con-
trols as needed. The setting indicated above should be
correct for normal household use. Your controls will be
set correctly when your milk and juice are as cold as
you like and your ice cream is firm.

Changing the control settings

If you need to adjust temperatures in the refrigerator or
freezer, use the settings listed in the chart below as
a guide. If you have any questions, call our Consumer

1

2

3

4

5

6

7

OFF

FREEZER

CO

LD

E

R

1

2

3

4

5

6

7

REFRIGERATOR

CO

LD

E

R

Assistance Center number, 1-800-253-1301, from
anywhere in the U.S.A.

Wait at least 24 hours between adjustments.

CONDITION:

Refrigerator
section too warm

Freezer section
too warm

Refrigerator
section too cold

Ice not made
fast enough

Both sections
too warm

REASON:

Door opened often

Large amount of food added

Room temperature too warm

Door opened often

Large amount of food added

Very cold room temperature
(can’t cycle often enough)

Controls not set correctly for your conditions

Heavy ice usage

Very cold room temperature
(can’t cycle often enough)

 

Door opened often

Large amount of food added

Very warm or very cold room temperatures

Refrigerator

5

 

4

4

5-6

3

 

4

4

6-7

5

 

5

RECOMMENDED SETTINGS:

Freezer

Содержание ED20DFXEB00

































Отзывы: