4
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools nee
d
e
d
for connecting the water inlet hoses
■
Pliers (that open to 1
9
/
16
" [39.5 mm])
■
Flashlight (optional)
Tools nee
d
e
d
for connecting the
d
rain hose
■
Locking pliers (that open to 1
9
/
16
" [39.5 mm])
Tools nee
d
e
d
for installation
■
Open end wrenches 17 mm and 13 mm
■
Level
■
Wood block
■
Ruler or measuring tape
Parts supplie
d
:
A
B
F
G
C
D
E
A. Drain hose form
B. Inlet hose (2)
C. Inlet hose washer (4)
D. Transport bolt hole plug (4)
E. Beaded strap
F. Drain hose
G. Hose clamp
Alternate Parts
Your installation may require additional parts. If you are interested in
purchasing one of the items listed here, call the toll-free number on
the cover or in the “Assistance or Service” section.
If You Have
You Will Nee
d
to Buy
Laundry tub or
standpipe taller than
96" (2.4 m)
Sump pump system (if not already
available)
Overhead sewer
Standard 20 gal. (76 L), 30" (762 mm) tall
drain tub or utility sink and sump pump
(available from local plumbing suppliers)
Floor drain
Siphon break, Part Number 285834;
additional drain hose Part Number
8318155; and connector kit, Part Number
285835
Drain hose too short
4 ft (1.2 m) drain hose extension kit, Part
Number 285863
Water faucets
beyond reach of fill
hoses
2 longer water fill hoses: 6 ft (1.8 m) Part
Number 76314, 10 ft (3.0 m) Part
Number 350008
Options
Pe
d
estal
You have the option of purchasing pedestals of different heights
separately for this washer. You may select a 10" (254 mm) or a
15.5" (394 mm) pedestal. These pedestals will add to the total height
of the washer for a total height of approximately 48" (1219 mm) or
53.5" (1359 mm), respectively.
A
B
A. 10" (254 mm) pedestal
B. 15.5" (394 mm) pedestal
To order, call the dealer from whom you purchased your washer or
refer to the “Assistance or Service” section.
Pe
d
estal
Height
Color
Part Num
b
er
10" (254 mm)
White
WHP1000SQ
10" (254 mm)
Black
WHP1000SB
10" (254 mm)
Diamond Dust (Silver)
WHP1000SU
15.5" (394 mm)
White
XHP1550VW
15.5" (394 mm)
Black
XHP1550VB
15.5" (394 mm)
Diamond Dust (Silver)
XHP1550VU
15.5" (394 mm)
New Aspen (Light Green)
XHP1550VA
15.5" (394 mm)
Tuscan Chestnut
XHP1550VC
15.5" (394 mm)
Ocean Blue
XHP1550VE
15.5" (394 mm)
Cranberry Red
XHP1550WR
15.5" (394 mm)
Lunar Silver
XHP1550WL
Stack Kit
Are you planning to stack your washer and dryer? To do so you
will need to purchase a Stack Kit.
To order, call the dealer from whom you purchased your dryer
or refer to the “Assistance or Service” section. Ask for Part
Number 8541503.
