41
Using your
Product
Night
AIR PURIFYING
(Auto)
1. Press “POWER” key to turn on the
machine
, lights up
.
2. Press “MODE” key until lights up.
3. Under Night mode, fan speed operates at extra low speed. Lover will set at front-up. After 1 minute
operation, the Air Quality LED
*
will
turn off
and the display & other icon will become dim.
4. Press “SWING” key to select vertical louver swing angle.
Air flow front-up front-down
Remarks 1 : When choosing different angle of the louver, louver will
be
swing to the largest angle
for
10 seconds
first
,
and then
move to the selected option.
Remarks 2
: Press the Air flow icon again, louver will stop
as is.
5.
If necessary, press “TIMER” key to adjust the operation duration 1-12 hours or CO(continuous).
6.
If necessary, press “Humidity” key to adjust the
humidity level.
1. Press “MODE” key until
lights up.
2.
Under Air purifying
(Auto)
mode
, compressor will
be
stop
ped
and no dehumidify function.
3.
The 3
-
color Air Quality LED
l
ights
up
according to below condition
:
·
Green – Air Quality is in good condition
·
Orange – Air Quality is in normal condition
·
Red – Air Quality is in bad condition
4.
Press “SWING” key to select vertical louver swing angle
.
Air flow front-up front-down
Remarks 1 : When choosing different angle of the louver, louver will
be
swing to the largest angle
for
10 seconds
first
,
and then
move to the selected option.
Remarks 2
: Press the Air flow icon again, louver will stop
as is.
5.
Under Air Purifying
(Auto)
mode
, IONIZER Key turn
s
on automatically.
Y
ou can stop
it when
necessary
.
6.
Under Air Purifying
(Auto)
mode
, Timer
can be set
.
7.
Under Air Purifying
(Auto)
mode
, LED display will show “--”
.
Air purifying system is used to remove contaminants and odors from the air in a room.
This unit
also
include
s
air purify system which includes Nano Silver
I
on
f
ilter;
All-in-one Multi-Protection
filter
#
, Ionizer and Air Quality LED.
Remark:
•
Under Night mode, the fan speed cannot be adjusted
Machine will stop
under following situation:
•
when
the
w
ater
t
ank is full (P.4
3
)
•
when the
temperature or humidity
is out of operation range
(P.38)
•
Press "CO" (continuous)the
unit
will stop automatically after
48
hours operation.
If water
tank was taken out during operation , the counting time will start over again.
Remark:
#
All-in-one Multi-Protection filter
is applicable to
model DS20
1
H
B
,
DS2
0
1
H
W
,
DS241H
B
and
DS241HW
•
Air Purifying function will be operated automatically under
every
modes and
can not be
switched off
.
•
Press "CO" (continuous),
the
unit
will stop automatically after
48
hours operation.
If water tank
was taken out during operation, the counting time will start over again.
•
Under Air Purify
(Auto)
mode, HUMIDITY
cannot be adjusted
.
•
Under Air Purifying
(Auto) mode,
fan speed will
be operated
automatically according to the air
quality
level
.
•
Under Air Purifying
(Auto)
mode, fan speed cannot be changed manually.
CAUTION
+
+
