28
DRYER DOES NOT START,
ALTHOUGH
START/PAUSE
HAS
BEEN PRESSED
Door not properly closed
• Push door to close it until it
clicks shut
Key lock is activated
• Press and hold the button
with the key symbol until the
display indicates that the keys
are unlocked .
Plug, power failure, fuse
• The plug is not in the socket or
making contact .
• There has been a power failure .
• The fuse has blown . Try to
plug another appliance into the
socket .
WATER DROPLETS ARE
BENEATH THE DRYER
Bottom filter not inserted
correctly
• Check position of the bottom
filter and make sure it is
completely integrated in the
filter compartment .
Lint remaining on bottom filter
or door seal
• Remove lint residues on the
rubber seals of bottom filter and
door seal .
Water tank not inserted correctly • Push in the water tank and
make sure that it is completely
integrated in the tank
compartment .
Direct drain connection not
working properly
• Check drain connection and
make sure that the water can
drain .
Dryer not standing level
• Check level position of dryer
on the tabletop with a water
level; if needed adjust the dryer
feet .
(refer to INSTALLATION GUIDE) .
Содержание DDLX 70113
