Whirlpool CFCR70211, Руководство пользователя

Страница: 8 / 40

8
User manual
OPTIONS
FUNCTIONS
! If the selected function is incompatible with the set programme, the incompatibility will be signalled by a buzzer (3 beeps).
! If the selected function is incompatible with another previously set function the function will not be enabled.
Start delay
ON/OFF
START/PAUSE
TEMPERATURE
SPIN
FR
To set the selected programme to start at a later time, press
the button to set the desired delay time. The symbol
lights on the display when this function is enabled.
Upto 24 hours. To cancel the delayed start, press the button
again untile the value ‚‘‘0‘‘ is shown on the display.
To switch on the washing machine: press the “ON
/OFF“ button, the “Start/Pause” button light up.
To switch off the washing machine during the wash cycle,
press and hold the button for approximately 3 seconds. If
the button is pressed briefly or accidentally the machine
will not swit ch off .
To switch off the washing machine after programme end:
press the “ON/OFF“ button until the ligh ts go off .
To start the programme, after you have finished
your settings. To pause a running programme. To continue
a paused programme.
Every programme has a predefined temperature. If you
want to change the temperature, press the
“temperature” button. The value appears on the display.
Every programme has a predefined spin speed. If you want
to change the spin speed, press the “Spin” button. The
value appears on the display.
This option enhances washing performance by generating
steam to inhibit the proliferation of the main bad odour
sources inside the machine. After steam phase, the
washing machine will perform gentle tumbling through
slow rotations of the drum. Fr option starts after
the cycle ends for a maximum duration of 6h and you can
interrupt it at any time by pressing any button on control
panel or turning the knob. Wait around 5 minutes before
door can be opened.
KNOB
To select and confirm programmes. Turn
to select.
KEY LOCK
To lock the control panel, press and hold the “Key
lock” button for approximately 3 seconds. The symbol
will light up on the display to indicate that the control
panel has been locked (with the exception of the “ON/
OFF“ button). This prevents unintentional changes to
programmes, especially with children near the machine. To
unlock the control panel, press and hold the “Key lock”
button for approximately 3 seconds .
BLEACHING
If you wish to bleach the laundry, load the washing machine
and set the “Rinse & Spin” programme .
Start the machine and wait for it to complete th e fi rst water
fi lling cycle (roughly 2 minutes) . u t the machine in pause
mode by pressing the “Start/Pause” button, open
the detergent drawer and pour the bleach (observe the
recommended doses indicated on the package) into the
main wash compartment where the partition was
previously mounted . Restart the cycle by pressing the
“Start/Pause” button .
If desired, it is possible to add fabric softener into the
appropriate compartment of the detergent drawer .
DEMO MODE
This function is only used for sales presentations . By this
you can interact with washing machine and see it working
without water . To enter Demo mode, switch the washing
machine ON and OFF again . Press and hold “Start/Pause”
button, then within 5 seconds press also “ON/OFF“
button and hold both buttons for 10 seconds .
To deactivate this function, switch the washing machine
OFF . Th e n press and hold “Start/Pause” button, within
5 seconds press also “ON/OFF“ button and hold both
buttons for 2 seconds .