Whirlpool CALYPSO WashMotion GVW9959K-0, Руководство пользователя

Страница: 39 / 68

35
ACCESSING COMPONENTS BENEATH THE WASHER TOP
Components accessible beneath the washer top are:
• Tub Ring
• Balance Ring
• Inner/Outer Wash Plates
• Leveler
• Universal Joint
• Dispensers
• Bleach Venturi
• Lid Switch
Raising the Washer Top to the Service Position
The washer top is hinged at the back edge. It does not have to be completely removed for access to
components inside the tub.
1. Disconnect power from the washing machine.
2. If the unit is close to the wall at the back, pull the washing machine forward a foot or two.
3. Gently pry the emblem from the front trim. (Fig. 3-8)
4. Remove the T-20 Torx screw holding the washer top to the cabinet latch.
5. Slide the washer top forward, approximately 1/2 inch, to clear the cabinet latch.
6. Raise the front of the washer top up and prop it high enough to allow full access to the con-
tents of the tub.
Latch and tabs
for Washer Top
Fig. 3-8
PERSONAL INJURY HAZARD
Be sure the washer top is securely propped up.
Failure to do so could result in personal injury.
! WARNING
T-20 Torx screw
Emblem
Fig. 3-9