
Air Only
Use the Air Only Modifier for items that require drying without heat
such as rubber, plastic, and heat-sensitive fabrics. This table shows
examples of items that can be dried using Air Only.
Type of Load
Foam rubber - pillows, padded bras, stuffed toys
Plastic - Shower curtains, tablecloths
Rubber-backed rugs
Olefin, polypropylene, sheer nylon
*Reset cycle to complete drying, if needed.
When using Air Only
■
Check that coverings are securely stitched.
■
Shake and fluff pillows by hand periodically during the cycle.
■
Dry item completely. Foam rubber pillows are slow to dry.
NOTE: Air Only is not available with Automatic Cycles.
Options
You can customize your cycles by selecting options.
Drum Light
On some models, select Drum Light to turn on the light inside the
Damp Dry Signal
Select the Damp Dry Signal to alert you that your clothes are
approximately 80% dry. This is useful when you want to remove
lightweight items in a mixed load to avoid overdrying or remove
partially dry items that may need ironing.
Time*
The Damp Dry Signal is useful when drying bedsheets/linens in a
(Minutes)
mixed load. When the signal goes off, open the door to stop the
dryer, rearrange the load inside the dryer, close the door, and restart
20 - 30
the dryer to finish the drying cycle. Rearranging the load will aid in
20 - 30
the drying process.
NOTE: The Damp Dry Signal is available only with the Automatic
40 - 50
Cycles.
10 - 20
End of Cycle Signal
The End of Cycle Signal produces an audible sound when the drying
cycle is finished. Promptly removing clothes at the end of the cycle
reduces wrinkling.
Press END OF CYCLE SIGNAL until the desired volume (Loud, Soft,
or Off) is selected.
NOTE: When the WRINKLE SHIELD™ setting is selected and the
End of Cycle Signal is on, a tone sounds every 5 minutes until the
clothes are removed, or the WRINKLE SHIELD™ setting ends.
Changing Cycles, Modifiers, and Options
You can change Automatic and Timed Cycles, Modifiers, and
Options anytime before pressing Start.
■
Three short tones sound if an unavailable combination is
selected. The last selection will not be accepted.
Changing Cycles after pressing Start
End Of Cycle Signal; Options; Changing Cycles, Modifiers, And Options - Whirlpool Cabrio W10164752A Use & Care Manual [Page 19]
End of Cycle Signal
https://www.manualslib.com/manual/190510/Whirlpool-Cabrio-W10164752a.html?page=19 (2 of 7)3/24/2018 10:32:34 PM