Home
Appliances
INSTALLATION
Remove the transit bolts
1.
Slacken the four bolts with the spanner supplied. In
addition, open the plastic loop wrapped round the
power cable.
Do not cut the loop.
2.
Unscrew the bolt by hand.
3.
Grip the bolt and remove it through the large aperture.
4.
Seal the resulting holes using the plastic caps supplied.
To do this, insert the caps in the wide part of the hole
in the direction of the arrow and push them into the
narrow groove until they click into place.
5. Keep the transit bolts for future use.
•
Whenever the appliance is transported, the transit bolts
must be refitted:
1.
Raise the plastic covers with a screwdriver, slide them
in the opposite direction of the arrow and remove.
2.
Insert the transit bolts in the reverse order.
3gb15023a.fm Page 11 Friday, July 19, 2002 10:59 AM
