5019 312 10613
Whirlpool is a registered trademark of Whirlpool USA
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
1. Turn the programme selector to the desired
programme.
2. The temperature and spin speed indicated on
the display can be altered by pressing the
“Temperature” button
or the “Variable spin”
button
. The light next to the “Start/Pause”
button
flashes.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
• Do not use liquid detergent for the main wash
when activating the Prewash option.
“Eco” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suitable for areas with
very soft water or for washing baby linen, and helps
people with allergies.
“Rinse hold” button
• The laundry remains in the last rinse water without
progressing to the final spin cycle to avoid creasing
and prevent colours from changing.
• This option is particularly recommended for the
programmes “Synthetics”, “Daily load” and
“Delicates”.
• It is particularly useful if you want to postpone
spinning to a later time, or if you want to drain only.
• If you select “Rinse hold”, do not leave the laundry
to soak for too long.
Note: The programme stops to “Rinse hold” at the
time the “Rinse hold”
lights up on the display.
The light next to the “Start/Pause” button
flashes.
Terminate the “Rinse hold” option
:
• Press the “Start/Pause” button
; the
programme will terminate automatically with the
final spin cycle for the present wash programme.
• If you do not wish to spin the clothes, turn the
programme selector to “Drain”
and press the
“Start/Pause” button
to start the Drain
programme.
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics”
and “Daily load” programmes to make ironing
easier.
• Increases the water quantity and the clothes are
spun very gently.
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
CONSUMPTION DATA
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
Approx. Programme Duration
(hours : minutes)*
White Cotton / Antibacterial
95
5.5
55**
1.70
1:55
Cotton
60
5.5
49
1.02
2:25
Cotton with “Eco”***
60
5.5
49
0.93
2:35
Cotton
40
5.5
53
0.55
2:00
Synthetics
60
2.5
53**
0.85
1:30
Synthetics
40
2.5
47
0.50
1:15
Daily load
40
3.0
43
0.48
1:00
Quick wash
30
3.0
36
0.30
0:30
Delicates
40
1.5
51
0.50
0:45
Jeans
40
5.5
73
0.55
2:15
Lingerie
30
1.0
42
0.30
0:35
Wool
40
1.0
53
0.50
0:45
Handwash
40
1.0
43
0.50
0:35
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*
The time indicated on the display can deviate from the values in the table, because it takes into account the household conditions
applicable at that time.
**
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
***
Reference Programme for Energy Label.
ADD DETERGENTS, CLOSE THE LID AND
SELECT THE PROGRAMME
SELECT ANY DESIRED OPTION
If there is a programme setting which you use
frequently, the appliance offers the possibility to save
one setting for each programme so that it can be used
again by just pushing one button.
• Select the desired programme, temperature, spin
speed and option(s), push and hold the
“Favourites” button
for at least 3 seconds.
The lamp next to “Favourites”
shortly
flashes
and then lights up - the programme setting is saved.
Next time you want to use your individual programme
setting, select the programme, push the “Favourites”
button
and start by pushing “Start/Pause”
.
If you want to replace the saved programme
setting by another one:
• Select the desired programme, temperature, spin
speed and options and then press and hold the
“Favourites” button
for at least 3 seconds.
The previously saved programme setting will be
replaced by the new one.
The “Start Delay”
allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper.
• Select programme, temperature, spin speed and
options.
• Press the “Start Delay” button to select the delay
time up to 23 hours.
• Press the “Start/Pause” button
.
The countdown of the delay time begins; the clock
symbol next to the delay time and the dot between
hours and minutes flash.
• The time delay indication disappears when the
programme starts and it is replaced by the
remaining programme time.
• Once having pressed the “Start/Pause” button
,
the number of hours preselected can be reduced by
pressing and holding the “Start Delay” button. From 1
hour on, the delay time can also be reduced by minutes.
To cancel the “Start Delay”
..before you press the “Start/Pause” button:
• Select another programme or press the “Reset”
button .
..after having pressed the “Start/Pause” button:
• Press the “Reset” button
for at least 3 seconds
- the start delay time disappears from the display.
Open the tap and press the “Start/Pause”
button
. The light next to the “Start/Pause”
button
is on. The programme sequence indicator
shows the current programme phase, running from left
to right through Wash, Rinse, Spin/Drain.
Before starting and after end of a programme, the symbol
lights to show that the lid can be opened. As long as a
wash programme is running, the lid remains locked and
must on no account be forced open. In case you have an
urgent need to open it during a running programme, refer
to “Cancel (Reset) a running programme before the end”.
You can lock the buttons of the control panel against
improper use (e.g. by children).
• Press the temperature and the spin speed button
simultaneously and hold them for at least 3
seconds. The key symbol on the display lights up.
• To unlock the buttons again: proceed in the same
way.
“Water tap closed”
The appliance has no or insufficient water supply. Open
the water tap; if the indication still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned; in the
latter case refer to the Instructions for Use (“Removing
the Filter”).
“Service”
Lighting up of the “Service” indication can be caused by
a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use;
if the fault persists, contact our After Sales Service.
•
The symbols of the programme sequence
indicator are dark, and the “Door open”
symbol
lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open lid and drum and unload the machine.
4. Leave the lid open to allow the inside of the
machine to dry.
1. Press the “Start/Pause” button
to pause the
programme. The light flashes.
2. Select the new programme, temperature, any
options and another spin speed if you want.
3. Press the “Start/Pause” button
again. The
new programme continues at the same position
where the previous programme was interrupted.
Do not add detergent for this programme.
The “Reset” button
cancels a programme before
the end.
•
Press the “Reset” button
for at least 3
seconds. Any existing water is drained out before
the lid can be opened.
SAVE YOUR FAVOURITE PROGRAMMES
START DELAY
PROGRAMME START
“DOOR OPEN” INDICATION
LOCK BUTTONS
RED INDICATIONS ON THE DISPLAY
PROGRAMME END
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
