Whirlpool AWD712S2, Руководство пользователя и онлайн-гарантия

Страница: 17 / 44

5. Troubleshooting
Below are suggested solutions before a technical service call.
If you experience the Possible causes Solution
following
Clothing is not being Lint filter clogged with lint. The lint filter must be cleaned before
dried properly, drying every load.
f----------------1-----------------1
times are too long or Have you selected the Airing Select the proper cycle for the type
the load is too hot.
cycle?
of clothing that you want to dry. See
the "Cycles guide."
The load is too large and Separate the load so that it can
heavy to dry quickly.
rotate freely.
The outdoor exhaust vent or Let the dryer run for 5-10 minutes.
hood is clogged with lint, Place your hand under the outdoor
obstructing air flow.
ventilation hood to check for the
movement of air. If you do not feel
any, clean lint from the ventilation
system or replace the exhaust vent
with a heavy metal or flexible metal
one. Ensure that the exhaust vent is
not crushed or kinked. See the
"Installation instructions."
The exhaust vent is not the Check the exhaust vent to verify that
correct length.
it is not too long nor has too many
turns. Ventilation with a long vent
will increase drying time. Be sure
that the exhaust vent is not crushed
or kinked. See the "Installation
instructions."
The load consists of
multilayered items such
as pockets, collars etc
If any individual items are still damp
after the drying cycle has completed,
extend the drying process by setting
to a 30 minutes drying cycle.
II