Tumble Dryer
Model:AWD60A
Page 13
TROUBLE SHOOTING
1. The dryer does not start.
The power supply plug is
not fully inserted into the
power point.
Y
N
N
Y
The local circuit is out of
power.
Insert the power plug into an
appropriate power point to
turn on the power.
Wait until the local circuit is
put on. Try to start the dryer
again.
N
Y
Programme knob on OFF.
Turn programme knob to
choose the drying programme.
The Start/Pause button
has not been pressed.
N
Press the Start/Pause button.
Y
Y
Check the connector and
connect it again.
N
Disconnect the power and
open the top board, check
if the connector is OK.
Check if the PCB is OK.
Replace with a new PCB, if
required.
N
