Whirlpool AMW 545, Инструкция по эксплуатации

Страница: 15 / 24

15
F
During the heating process the oven may
stop (depending on program) and prompts
you to “TURN” food.
— Open the door.
— Turn the food.
— Close the door and restart by pressing the
Start button.
6
Th
SENSE CRISP
Adjusting doneness
When using
this function, you also have the
possibility to personally control the end result
through the Adjust
doneness feature. This
feature enables you to achieve higher or lower
end temperature or longer and shorter time.
The standard setting normally gives you the
best result.
In case the food you heated became too warm
to eat at once. You can easily adjust this before
you use this function the next time.
This is done by selecting a Hi or Low level with
the +/- knob.
1
2
4
3
Use this function to quickly reheat your
food from frozen to serving temperature.
This function is used only for frozen ready-
made food.
1. Turn the multifunction knob to the Auto
position.
2. Press the Auto button to select the desired
auto function.
3. Turn the +/- knob to choose desired food
class.
Increases the end
temperature.
Decreases the end
temperature.
Note:
The doneness can only be set or altered during
the fi rst 20 seconds of operation including
when “ ” is displayed.
Note: the oven continues automatically after 1
min if the food hasn’t been turned. The heating
time will be longer in this case.
The program should not be interrupted as
long as “ ” is displayed.
The Program can be interrupted when the
time is displayed.
Do not use with this function.
Only use the supplied Crisp plate
with this function. Other available
Crisp plates on the market will not
give the correct result when using
this function.
IMPORTANT!
Do not place any containers or wrappings on the
Crisp plate!
Only the food is to be placed on the Crisp plate.
Step a & b need only to be performed when
food class #5 is chosen.
(a). Press the Select button (default weight is
displayed).
(b). Turn the +/- knob to set the weight of the
food.
4. Press the Start button.
+
-