EN12
BROWNING
At the end of cooking, with certain functions, the display indicates the possibility of browning the surface of
your dish. This function can only be used when cooking time has been set.
At the end of cooking time, the display shows “^ to prolong, to brown”. Press button
, and the oven
starts a 5 minute browning cycle. This function can only be used once after cooking.
SETTING END OF COOKING TIME / DELAYED START
The end of cooking time can be set, delaying the start of cooking by up to a maximum of 23 hours and
59 minutes. This can only be done once cooking time has been set.
This setting is only possible when
pre-heating is not required for the selected function.
After setting cooking time, the display shows the end of cooking time (for example 19:20). To delay the end
of cooking time, and thus also the cooking start time, proceed as follows:
1.
Position the cursor next to the end of cooking time using buttons
.
2.
Press button
to select the setting: the end of cooking time flashes.
3.
To delay the end of cooking time, use buttons
and
to set the desired value.
4.
Confirm the selected value by pressing button
.
5.
Press button
. The display indicates which shelf food should be placed on.
6.
Press button
to activate the function. The oven will start cooking after a period of time calculated
so as to finish cooking at the set time (for example, in the case of a dish which requires a cooking time
of 20 minutes, if the end of cooking time is set to 20:10, the oven will begin cooking at 19:50).
N.B.: during the interval before cooking starts, the oven can in any case be switched on by pressing
button .
At any time during cooking, set values (temperature, grill setting, cooking time) can be changed
using buttons
and button
as described in previous paragraphs.
TIMER
This function can be used only with the oven switched off and is useful, for example, for monitoring the
cooking time of pasta. The maximum time which can be set is 1 hour 30 minutes.
1.
With the oven switched off, press button
: the display will show “00:00:00”.
2.
Press buttons
and
to select the desired time.
3.
Press button
to start the countdown. When the set time has elapsed, the display will show
“00:00:00” and an acoustic signal will sound. At this point the time can be prolonged, proceeding as
described above, or the timer can be deactivated by pressing button
(the time of day will be
shown on the display).
Browning
COOK TIME
END TIME
20:05
- 00:05
Cooking finished at 20:00
^ to prolong,
✓
to brown
Browning finished at 20:05
PREHEAT
No
TEMPERATURE
180°C
HH:MM
END TIME
Forced Air
19:20
- 00:20
PREHEAT
No
TEMPERATURE
180°C
HH:MM
END TIME
Forced Air
19:20
- 00:20
PREHEAT
No
TEMPERATURE
180°C
HH:MM
END TIME
Forced Air
20:10
- 00:20
Press to set Timer,
✓
to Start
00 : 00 : 00
(HH) (MM) (SS)
Press to set Timer,
✓
to Start
01 : 10 : 00
(HH) (MM) (SS)
Timer
01 : 09 : 00
Содержание AKZM 656
Страница 1: ...User and maintenance manual EN AKZM 6560 AKZM 656 ...
Страница 2: ......
Страница 23: ......
Страница 24: ...Whirlpool is a registered trademark of Whirlpool USA Printed in Italy 03 2012 5019 300 01158 GB ...