5019 100 75111
AKR 520
1. Control panel
2. Grease filters (behind the extractor grille)
3. Lighting unit
4. Pull-out steam deflector
REMOVING AND RENEWING OR
CLEANING THE GREASE FILTER
1. Unplug the appliance or switch off the mains
power supply.
2. Pull out the steam deflector.
3. Open the extractor grille.
4. Remove the device securing the grease
filter (a).
5. Remove the dirty grease filter.
6. After the grease filter has been replaced or
cleaned (depending on model), refit the parts
in reverse order, making sure the entire
extraction surface is covered.
FITTING OR RENEWING
THE ACTIVATED CARBON FILTER
1. Unplug the appliance or switch off the mains
power supply.
2. Pull out the steam deflector.
3. Open the extractor grille.
4. Fitting: fit the activated carbon filter over the
extraction grille. The arrow (b) on the tab of
the activated carbon filter should line up with
the arrow on the fan shroud (c).
Turn clockwise (d) until the tab covers the
hole. The pin under the tab will then locate in
the hole to secure the filter.
Removing: release the filter by pulling the
filter tab downwards, then turn the activated
carbon filter anti-clockwise to release it from
its seat.
5. Refit the extraction grille.
REPLACING BULBS
1. Unplug the appliance or switch off the mains
power supply.
2. Pull out the steam deflector.
3. Open the extractor grille.
4. Remove the burn-out bulb.
Use 40W max E14 bulbs only.
5. Refit the extraction grille.
CONTROL PANEL
A. Light switch.
B. Speed selector switch.
2
1
4
3
O
I
0 1 2 3
small amount of steam and fumes
A
B
medium amount of steam and fumes
large amount of steam and fumes
a
b
c
d
PRODUCT DESCRIPTION SHEET
PL
H
SK
CZ
BG
RUS
GB
RO
