INSTRUCTIONS FOR USING THE ELECTRONIC TIMER
Electronic timer
Starting the oven
When the oven is connected to the power supply for the first time, or reconnected after a power failure, the display indicates
“
12:00
”.
Selecting and changing the clock time:
1.
Press “ok”. The time of day flashes on the display.
2.
Press button
“-”
or
“+”
to set the hour.
3.
Press “ok” and
“-”
or
“+”
to set the minutes.
4.
Press “ok” to confirm.
To change the time:
Press and hold “ok” for 2 seconds until the time flashes on the display. Repeat the steps described above.
Selecting the cooking function:
1.
Turn knob
���
to the chosen function.
2.
Turn knob
���
to select the temperature.
3.
Press “ok” to confirm; the oven will switch on. The indicator next to
switches off when the selected temperature
is reached.
To change the temperature:
1.
Turn knob
���
and select the desired temperature.
Important notes:
To cancel any selection, turn knob
���
to
“0”
. Alternatively, press “ok” to switch the oven off, maintaining the previously
selected functions.
Selecting the cooking time:
Select the cooking time (available with any function, except for the special functions) to turn the oven on for a specified period
of time. At the end of the specified time the oven will switch off automatically. The maximum programmed cooking time is 6
hours.
1.
Set the function and the temperature (see chapter: “Selecting the cooking function”) up to point 2 without confirming by
pressing “ok”.
2.
Press “set” (the indicator on the display lights up next to the cooking time symbol
) and, within 8 minutes, proceed
to select the desired cooking time using buttons
“-”
or
“+”
.
3.
Confirm the selection by pressing “ok”; the oven switches on and the display shows the residual cooking time.
4.
To change the previous temperature setting, turn knob
5
.
To return to the residual cooking time, wait 5 seconds.
Appearance of
on the display:
Once the set time has elapsed, an acoustic signal is heard and
appears on the display.
The oven will switch off automatically.
To change the cooking time, use button
“-”
or
“+”
. Return to point 3 chapter “Selecting the cooking time”.
1.
Turn knob
���
to “0”
The time of day appears again on the display.
To increase the cooking time, use button
“-”
or
“+”
.
Selecting the end of cooking time
Using this function it is possible to preset the end of cooking time. The maximum programmed cooking time is 23 hours and
59 minutes.
1.
Proceed as described in points 1 and 2 chapter “Selecting the cooking time”
2.
Press “set” to set the end of cooking time: the indicator next to the symbol
lights up.
3.
Set the end of cooking time using button
“-”
or
“+”
.
4.
Press “ok” to confirm the end of cooking time.
The oven will turn on automatically at the end of cooking time minus cooking time: the
indicators on the display above
the symbols
will light up.
Minute minder
The timer can only be set when the oven is not in use and allows a maximum setting of 6 hours.
To set the minute minder:
1.
Leave knob
���
on
“0”
. The display shows the time of the day.
2.
Press “set”. The indicator next to the symbol
lights up.
Use buttons
“-”
or
“+”
to set the desired time.
3.
Press “ok” to confirm the selection.
Once the set time has elapsed:
An acoustic signal sounds and
flashes on the display.
Press “ok”: The acoustic signal stops. The time of day appears again on the display.
Childproof lock
:
1.
With knobs
���
and
���
set to “0”, press buttons “ok” and - at the same time for 5 sec. The indicator next to the
symbol
lights up.
2.
The oven functions will not operate while the childproof lock is activated.
3.
To deactivate the lock, repeat the sequence described in point 1.
WARNING:
if
appears on the display without blinking, the oven is not necessarily off. Be careful.
Displays
���
Function selector knob
���
Setting button: (“set”)
���
Confirmation button (“ok”)
���
Buttons for changing time
(
“-”
“+”
)
���
Thermostat knob
Temperature indicator
Cooking time
End of cooking
time
Childproof lock
Minute minder
