Whirlpool AFB 601 AP, Инструкция по эксплуатации

Страница: 22 / 196

Installation requirements
To ensure correct appliance operation, it must not be exposed to
temperatures below 16 °C or above 32 °C.
It is advisable to avoid the following places: kitchens without
ventilation, outside rooms, greenhouses, garages. In order to
operate correctly, the appliance must be installed:
in a dry place.
Away from direct sunlight.
Away from extreme temperatures (away from cookers or other
heat sources).
When full, the appliance will be heavy, and therefore it must be
placed on a strong and solid floor.
Ventilation requirements
Carefully push the freezer in place, until reaching the appropriate
distance from the wall.
When in place, a space of 50 mm above the appliance must be
maintained.
If the space is not available above the appliance, leave a space of
25mm on both sides.
Make sure the appliance does not squash the power cable.
The parts that can become hot must not be exposed. When possible,
the back part of the appliance must be close to the wall, leaving the
required space for ventilation.
Levelling
The appliance must be level; to eliminate rocking:
make sure the appliance is vertical and that both adjustment
devices are in close contact with the floor, so that the
compartment is level.
Adjust the level by unscrewing the appropriate adjustment device,
located at the front (use fingers or a screwdriver).
The appliance is heavy. Pay attention when moving it.
* For specific details please refer to the rating plate located on the
back of the freezer. The specifications are subject to change
without notice.
Note:
If reversing of door opening is carried out by the After-sales
Service the work is not covered by the warranty.
WALL
22