SERVICE
Whirlpool EMEA
Customer Services
8511 764 01820, 08/10/10
page 10 of 20
To change the water softener setting:
• · Push the POWER button on
• · Change to program 2
• · Hold the START button for 5 seconds until the LED is flashing
• · Water softener setting is shown by flashing LED
• · By pushing the START button you can change the setting
• · Push the POWER button off to save and exit the water softener setting
DURETE DE L’EAU
water hardness Water hardness
German degrees °dH
French degrees °fH
English degrees Clarke °e
mmol/l
Water softener setting is shown by flashing LED
1 soft
0 - 5
0 - 9
0 - 6,3
0 - 0.9
1 x
1 - 2 soft/ medium
6 - 10
10 - 18
7 - 12.6
1 - 1.8
2 x
2 medium
11 - 15
19 - 27
13.3 - 18.9
1.9 - 2.7
3 x
3 medium/ hard
16 - 21
28 - 37
19.6 - 25.9
2.8 - 3.7
4 x (DEFAULT SETTING)
4 hard
22 - 28
38 - 50
26.6 - 35
3.8 - 5.0
5 x
4 very hard
29 - 35
51 - 63
35.7 - 44.1
5.1 - 6.3
6 x
4 extremely hard
36 - 60
64 - 107
44.8 - 74.9
6.4 - 10.7
7 x
1 weich
0 - 5
0 - 9
0 - 6,3
0 - 0.9
1 x
1 - 2 mittel
6 - 10
10 - 18
7 - 12.6
1 - 1.8
2 x
2 mittel
11 - 15
19 - 27
13.3 - 18.9
1.9 - 2.7
3 x
3 mittelhart
16 - 21
28 - 37
19.6 - 25.9
2.8 - 3.7
4 x
4 hart
22 - 28
38 - 50
26.6 - 35
3.8 - 5.0
5 x
4 sehr hart
29 - 35
51 - 63
35.7 - 44.1
5.1 - 6.3
6 x
4 äußerst hart
36 - 40
64 - 107
44.8 - 74.9
6.4 - 10.7
7 x
ACCESSOIRE
If you need spare parts apart from the spare part list have a look in the Service Bulletin 4812 718 40084.
For higher mounted Dishwashers to prevent the drain off effect - also usable for lower drain pipes and to
prevent the failure F8 use Kit 4812 310 18993.
© Whirlpool EMEA
www.scc-service.com
