Decorative Retaining Bar Installation Instructions
Decorative
Retaining Bar
Screw
Screw Cap
1. First, take the decorative retaining bar out from refrigerator, use cross recessed screwdriver
to
set
the
screw
on
the
bottom
beam
.
Fix
it
tight
with
all the screw thread twisted through the hole.
2. Second, cover the screw by screw cap.
3. Third, tear off the protective film before using.
Handle Installation Instructions
1. First, take the handle set bolts from the refrigerator, use cross recessed screwdriver to set the bolt
on the door. Fix it tight with all the screw thread twisted through the hole.
2. After the first step is completed, take the door handle out from the refrigerator, fix the handle hole
with
the
screw
.
3. Use rubber mallet or similar tool to tap the handle from the top down, and shake the handle, so as
to confirm that the handle is well installed.
Handle Installation Instructions
14
