22
Interior Cleaning
1.
Unplug refrigerator or disconnect power.
2.
Hand wash, rinse, and dry removable parts and interior
surfaces thoroughly. Use a clean sponge or soft cloth and a
mild detergent in warm water.
NOTE:
Do not use abrasive or harsh cleaners such as window
sprays, scouring cleansers, flammable fluids, cleaning waxes,
concentrated detergents, bleaches, or cleansers containing
petroleum products on plastic parts, interior and door liners,
or gaskets.
3.
Plug in refrigerator or reconnect power.
Condenser
This refrigerator has skin condenser on both sides of refrigerator.
It is normal to feel warm on the sides.
Lights
The lights in both the fresh food and freezer compartments are
LEDs which do not need to be replaced. If the lights do not
illuminate when the door is opened, contact the dealer from
whom you purchased your refrigerator.
Holiday and Moving Care
Holidays
If You Choose to Leave the Refrigerator On While You’re
Away:
1.
Use up any perishables and freeze other items.
2.
If your refrigerator has an automatic ice maker and is
connected to the household water supply, turn off the water
supply to the refrigerator. Property damage can occur if the
water supply is not turned off.
3.
If you have an automatic ice maker, turn off the ice maker.
■
Press the switch to Off (O) for the door ice maker.
4.
Empty the ice bin.
If You Choose to Turn Off the Refrigerator Before You Leave:
NOTE:
Put refrigerator in Demo Mode while on Holiday. See the
“Using the Controls” section.
1.
Remove all food from the refrigerator.
2.
If your refrigerator has an automatic ice maker:
■
Turn off water supply to the ice maker at least 1 day ahead
of time.
■
When last load of ice drops, press the switch to Off
(O) for display to be unlit on the top inside of the
refrigerator, depending on your model.
3.
Empty ice bin.
4.
Turn off temperature controls. See the “Using the Controls”
section.
5.
Clean refrigerator, wipe it and dry well.
6.
Tape rubber or wood blocks to the tops of both doors to prop
them open far enough for air to get in. This stops odours and
mould from building up.
Moving
When you are moving your refrigerator to a new home, follow
these steps to prepare it for the move.
1.
If your refrigerator has an automatic ice maker:
■
Turn off water supply to the ice maker at least 1 day ahead
of time.
■
Disconnect water line from the back of the refrigerator.
■
When last load of ice drops, press the switch to Off (O)
either on the ice maker or the control, depending on your
model.
2.
Remove all food from refrigerator and pack all frozen food in
dry ice.
3.
Empty ice bin.
4.
Unplug refrigerator.
5.
Clean, wipe and dry thoroughly.
6.
Take out all removable parts, wrap them well and tape them
together so they don’t shift and rattle during the move.
7.
Depending on the model, raise the front of the refrigerator so
it rolls more easily or raise the levelling screws so they do not
scrape the floor. See the “Adjust the Doors” or “Refrigerator
Levelling and Door Closing” sections.
8.
Tape doors closed and tape the power cable to the back of
the refrigerator.
When you get to your new home, put everything back and refer to
the “Installation Instructions” section for preparation instructions.
Also, if your refrigerator has an automatic ice maker, remember to
reconnect the water supply to the refrigerator.