1. After loading the dishwasher, close the
door properly and open the water
supply tap.
2. The dishwasher switches on
automatically as soon as the
programme selector knob is turned.
One of the programme indicator
lamps will switch on.
3. Turn the selector knob to select the
desired programme. The corresponding
indicator lamp lights up. If required,
select options (if supplied).
4. Press the Start button to start the
selected wash programme. The
corresponding indicator lamp
switches on. Once set, the
programmed data cannot be altered by
turning the programme selector knob.
Note: Once the Start button has been
pressed, the dishwasher memorises the
last programme selected. This
information remains in the memory even
during interruption of the power supply.
To change the selected
programme, press the Start button
for about 5 seconds, until the Start
indicator lamp switches off.
Select a new programme using the
programme selector knob and
press the Start button.
Note: If the dishwasher is switched off
during a wash programme, when
switched on again the dishwasher
resumes the wash cycle from where it
was interrupted.
Only open the dishwasher door if
strictly necessary during a wash
cycle and exercise maximum
caution. Danger of scalding from
steam.
5. To indicate the end of the programme,
the Start indicator lamp switches off
and the End indicator lamp (if fitted)
lights up (for about 30 min.).
6. Turn the programme selector knob to
the “0” position to switch off the
dishwasher (only after the Start
indicator lamp has switched off). All
the indicator lamps switch off.
7. Open the door (warning: beware of hot
steam). Unload the lower rack before
the upper one. Close the water tap.
Upper rack
Half load / Multizone:
If the upper rack only is to be loaded, place
the cutlery basket (B) on the upper rack.
Rack height adjustment:
(The dishwasher is delivered with the upper
rack in the top position).
The rack height can also be changed
when loaded.
•
To lower: pull out the two side
handles and gently lower the rack.
•
To raise: pull up the two side handles
until the rack clicks into place.
•
The rack must be level on both sides.
Crockery Holders:
•
Down:
cups and long-stemmed glasses.
•
Up: plates.
“Flex
3
”: multi-purpose support
•
To be used, for example, for long-
handled utensils (arrange knives
with the blade facing downwards),
cups and glasses.
•
May be used in three different
positions (see also “Dishwasher
loading instructions” on Page 4).
1. Upon the left-hand side of the rack.
2. Upside-down, towards the centre of
the rack.
3. Upside-down, towards the left side.
Glass holder:
Lower rack
Half load / Multizone:
Loading the lower rack only gives
greater washing power, especially for
plates and saucepans.
Plate holders:
•
(A) may be lowered to increase
available space.
Cutlery basket:
The cutlery basket can be removed to
increase (B + C) available space.
•
It can be placed on the upper rack (B)
when the Half load / Multizone function
is selected.
B
A
A
C
B
C
How to use the dishwasher
Please read the user instructions carefully.
Upper and lower rack