Whirlpool 4322453, Инструкция по эксплуатации

Страница: 35 / 36

- 31 -
PROBLEM SOLUTION POSSIBLE CAUSE
Check wiring (see wiring dia-
gram).
Check indicator light.
Check switch.
Loose or bad wiring to indicator
light.
Defective indicator light.
Defective cooktop infinite switch.
Surface indicator light does not
operate.
Oven will not bake. Bake element is defective.
Defective electronic control.
Loose or bad wiring.
Check bake element.
Check control.
Check wiring (see wiring dia-
gram).
Broil element is defective.
Defective electronic control.
Loose or bad wiring.
Oven does not broil.
Check broil element.
Check control.
Check wiring (see wiring dia-
gram).
Check sensor.
Check control.
Defective oven sensor.
Defective electronic control.
Overheating or “runaway” oven.
Premature burnout of bake
element.
Improper use of oven (e.g. being
used to heat the home).
Use oven for baking only.
Damaged oven door gasket. Improper cleaning. Do not use harsh abrasives or
scouring pads. See Use & Care
instructions.
Food is burnt on bottom but not
cooked on top. Defective broil element.
Defective electronic oven control.
Loose or bad wiring.
Check broil element.
Check control.
Check wiring (see wiring dia-
gram).
Error Codes
The microcomputer contains self-diagnostic codes that will be displayed on the control panel
whenever a failure occurs when using the range. Each code can be cancelled by pressing the
OFF/CANCEL keypad. The code will return if the user attempts to use the range before the failure
has been corrected. All error code data is shown on the next page.