Whip Mix AquaSpense, Руководство пользователя, Страница: 11 / 16

9
Purge Liquid (SL Units only):
This function allows you to flush the special liquid hose. This may be
useful if changing between bottles that contain differing liquids, while
using the same cap and hose assembly.
1. Press the Menu button.
2. Use the or buttons to select Special Functions.
3. Press the Enter button.
4. Use the or button to select Purge Liquid.
5. With a container on the scale, press the Start button.
6. After the first few drops fall from the hose, press Abort to end.
Prime Water Hose:
Use this function if you encounter an Out of Water error and there is
water visible in the bottle (or other container).
1. Press the Menu button.
2. Use the or buttons to select Special Functions.
3. Press the Enter button.
4. Use the or button to select Prime Water Hose.
5. With a container on the scale, press the Start button.
6. After air is removed from hose, press Abort to end.
MAINTENANCE
Note: Some special liquids crystallize when exposed to air, and may
impede dispensing of special liquid. Daily maintenance is required.
Daily:
With a damp paper towel, gently pinch
the tip of the Special Liquid hose to
free crystallized particles. This should
be done each morning before use and
any time the dispenser has not been
used for several hours.
As needed:
1. Wipe down the unit with a damp cloth.
2. Remove the scale cover and clean.
3. If the special liquid hose develops a clog that is not near the open
end, replace it.