WHI Safeguard Limited
Meryll House, 57 Worcester Rd,
Bromsgrove, B61 7DN.
T.
44 (0) 1753 325 101
E.
MADE IN CHINA
T20 - LED Work Light
WARNING NOTICES
1) Read this manual carefully before use, and ensure that the lights are used in accordance with the given
guidelines.
2) To reduce the risk of electric shocks and fire, do not exceed the recommended maximum string size for
your lights. This is 10pcs for 60W, 6pcs for 100W, and 4pcs for 150W.
3) These work lights are suitable for use in both dry and damp locations.
4) Work lights should be disconnected from power when wet in order to avoid electric shocks.
5) This unit is not intended to be used as illumination for emergency exits.
6) Do not install this unit in a hot or sealed environment, or allow them to be exposed to corrosive gases,
as this can affect the service life.
7) Do not place any combustible or flammable materials on the lamp surface.
8) This light should be installed, tested and maintained by professionals using appropriate equipment.
9) Check the contents of the package upon receipt, and advise your dealer of any damage.
REMOVING THE HANDLE
MOUNTING INSTRUCTIONS
1-2. Remove the screws
3-4. Bend the handle 90 degrees
towards the screws
5. Lift and remove
1
2
3
4
5
CONNECTING EYEBOLT
TRIPOD INSTALLATION
WARRANTY INFORMATION
This product is provided with a 5 year warranty. Free repair or
replacement will be offered during this period.
The warranty is not valid if :
* Damage is caused by improper operation or installation of the unit.
* The unit has been dismantled or repaired without authorisation.
* The user cannot supply a valid invoice or proof of purchase.
For assistance after the warranty period expires, please contact your
supplier.
