Page 2
5.25
.32
9.27
6.25
5.250
7.00
8.000
.281 DIA
(4) PLACES
MOUNTING HOLE
SP123DB
SIREN
BUMPER SP123 CHROME
SPEAKER GRILLE
1/4 FLAT
WASHER
1/4-20 ELASTIC STOP NUT
BRASS NICKEL PLATE
1/4-20 X 1" PHILLIPS PAN HEAD
MACHINE SCREW SS
BUMPER
(NOT PART OF KIT)
BUMPER MOUNT
SPEAKER BRACKET
14 X 3/4 HEX HEAD
SHEET METAL SCREW
BUMPER GRILL SP123
SPEAKER TRIMMED CHROME
1/4 FLAT
WASHER
1/4-20 ELASTIC STOP NUT
BRASS NICKEL PLATE
1/4-20 X 1" PHILLIPS PAN
HEAD MACHINE SCREW
BUMPER MOUNT
SPEAKER BRACKET
(NOT PART OF KIT)
BUMPER
14 X 3/4 HEX HEAD
SHEET METAL SCREW
Model
SP123BCC
Model
SP123BMC
IMPORTANT: The speaker must be oriented so the
wire passage hole is in the “6 o’clock” position
(closest to the road). This hole also serves as the
drain hole for the siren. Improper mounting will
result in premature driver failure and void the
product warranty
Caution: Permanent mounting of this product will require drilling. It is absolutely
necessary to make sure that no vehicle components could be damaged by this
process. Check both sides of the mounting surface before starting. If damage is
likely, select a different mounting location.
IMPORTANT! It is the responsibility of the installation technician to make sure
that the installation and operation
of this product will not interfere with or
compromise the operation or efficiency of any vehicle equipment! Before
returning the vehicle to active service, visually confirm the proper operation of
this product, as well as all vehicle components/equipment.
INSTALLATION:
Install speaker as shown below for your model. Extend the Positive (White) and Negative
(Black) speaker wires to your siren amplifier. Refer to your siren amplifier manual
for connection and operating information.
SP123DB
SIREN
