Page 4
message title given to the message when it was created. When the desired message’s title is shown
in the display window, proceed to step 3.
or
Use the keypad to type the specified message to be displayed. After the numbers are pressed
the display screen will show that the select option is activated (“SEL”) and it will display the
message title. As the desired message appears in the screen, proceed to step 3.
3.
Press the DSP button.
When the display button has been pressed, the selected message will then appear on the
Messenger display.
The display screen of the MGC02 will show the name of the message, whether the message is
being shown on a forward- or rear-facing (F or R) Messenger display and an indication that
the MGC02 is in display mode (DSP).
To Change from one message to another
1.
Display a Message as outlined above.
2.
Press either the Up or Down arrow buttons to scroll through the list of available messages or
select a message directly by using the Keypad.
3.
When the desired message is shown, press the DSP (Display) button. The selected Message is
now displayed.
To Clear the Messenger display
1.
Press the CLR or “0” button.
When the Clear or “0” button is pressed, the blank “No MSG” message is selected.
2.
Press the DSP button.
When the Display button is pressed, the currently selected message is displayed on the
Messenger. In this case, the Messenger will be blank.
Section III:
Other MGC02 Features
Backlight Control
The MGC02 control head offers two backlight features, each independent of the other.
They are activated as follows:
•
The LCD Display Window is backlighted whenever the MGC02 is turned on.