Page 2
1. Locate the Driver-side inner grille light bracket. Position
this bracket in the area shown in the illustration. When
properly located, the bracket ‘ears’ will engage the
grille slats.
2. Position the Driver-side outer grille light bracket into
position in front of the inner bracket, Secure the outer
bracket to the inner bracket using the 10 x 1 screws
shown.
3. Place the lens and lighthead into the housing. Now
insert the screws that will be used to mount the
assembly. IMPORTANT! Make sure the screws are
placed in their proper location (see illustration on
following page)
4. Place the lighthead/housing assembly into position on
the outer grille bracket. Feed the lighthead wires
through the grille, making sure that no wires are
pinched between the housing and the grille.
5. Complete the wiring as outlined in
Section 3: System
Wiring Diagram.
Section 1: Grille Light
