Page 9
To enter the Keypad programming mode, select Test & Misc. Scroll to the Program Encoder screen and
press Precheck. The display will show the word Clock. Use the Scroll arrows to select a parameter. The list
of parameters are:
Clock
Call Key
Timed Trans. 1
Timed Trans. 2
Remote Input 1
Remote Input 2
Tmx Warm Up
Area Code
Base I.D.
Precheck Digit
Precheck Duration
Channel Grant Wait
Channel Grant Delay
Reset Programming
Press Precheck, after scrolling to the desired parameter, to select that parameter. Not all parameters are
programmed the same way. The following describes programming for each parameter.
Clock:
First enter the day of the week. Use the numeric keys to select the day as follows:
1 = Sunday, 2 = Monday, 3 = Tuesday, 4 = Wednesday, 5 = Thursday, 6 = Friday,
7 = Saturday. Next, enter the time using a 24-hour format (e.g. 1:00 AM would be
01:00:00; 1:00 PM would be 13:00:00). Enter hours first (use leading zeroes),
then minutes, then seconds. Press Precheck to enter. Press Reset to return to the
Stand By display.
Call Key:
Use the numeric keypad to select the Call Key number (0-7) and press
PRECHECK
to enter. Next use the numeric keypad to select a two digit sequence
number (00-99) and press
PRECHECK
to enter. Now select the command or
function by using the COMMAND GROUP keys and the arrows. Press
PRECHECK
when the desired function appears on the display. Use the numeric
keypad to select the Address and press
PRECHECK
to enter. Finally use the
numeric keypad to select a delay time (000 to 255 seconds) and press
PRECHECK
to enter. Press
PRECHECK
to save.
Repeat for each sequence of the Call Key.
Timed Trans. 1 or 2:
Use the numeric keypad to select the time and press
PRECHECK
to enter. Now
select the command or function by using the COMMAND GROUP keys and the
arrows. Press
PRECHECK
when the desired function appears on the display. Use
the numeric keypad to select the Address and press
PRECHECK
to enter. Finally
use the numeric keypad to select the days to be skipped by this activation. As
described earlier, 1 = Sunday, 2 = Monday, 3 = Tuesday, 4 = Wednesday, 5 =
Thursday, 6 = Friday, 7 = Saturday. Note that the day changes to lower case if it is
a skipped day. Press
PRECHECK
to enter. Press
PRECHECK
to save.
