Page 9
SYSTEMS 104-D, 104-H & 204-D
Driver Side/End of cable towards Remote Head
RED
wire
Position
A
in the 3 position DEUTSCH connector
BLACK
wire
Position
B
in the 3 position DEUTSCH connector
WHITE
wire
Position
C
in the 3 position DEUTSCH connector
Connect to Strobe Light in Remote Head.
YELLOW
wire
Position
A
in the 3 position DEUTSCH connector
VIOLET
wire
Position
B
in the 3 position DEUTSCH connector
BLUE
wire
Position
C
in the 3 position DEUTSCH connector
Connect to Brake, Tail-Turn Signal Light in Remote Head.
GREEN
wire
Position
A
in the 3 position DEUTSCH connector
BROWN
wire
Position
C
in the 3 position DEUTSCH connector
Connect to Back-Up Light in Remote Head.
ORANGE
wire Auxiliary Wire
Driver Side/End of cable towards Power Supply
RED
wire
Connect (with Set Screw Connectors) to
RED
wire on Harness Kit
Insert
other end of RED
Harness Kit wire into
Position 1
on connector.
BLACK
wire
Connect (with Set Screw Connectors) to
BLACK
wire on Harness Kit
Insert
other end of BLACK
Harness Kit wire into
Position 2
on connector.
WHITE
wire
Connect (with Set Screw Connectors) to
WHITE
wire on Harness Kit
Insert
other end of WHITE
Harness Kit wire into
Position 3
on connector.
Connect pin housing to OUTLET 1.
NOTE: The remaining wires are to be connected as follows. If a wire is designated for a specific
lamp (ex. Driver Side Tail Light), that wire must be connected to the existing, factory circuit for that
lamp. Some vehicles provide access to specific circuits in fuse blocks located behind the seats in
the vehicle cab. If your vehicle is not equipped with this feature, these harness wires may have to
be routed back to the actual lamp and connected directly to that specific circuit.
YELLOW
wire
Driver Side Tail Light
(Positive)
BLUE
wire
Negative Ground
VIOLET
wire
Driver Side Brake Light and Left Turn Signal Light
(Positive)
BROWN
wire
Negative Ground
GREEN
wire
Back Up Light
(Positive)
ORANGE
wire
Auxiliary Wire
Passenger Side/End of cable towards Remote Head
RED
wire
Position A
in the 3 position DEUTSCH connector
BLACK
wire
Position B
in the 3 position DEUTSCH connector
WHITE
wire
Position C
in the 3 position DEUTSCH connector
Connect to Strobe Light in Remote Head.
YELLOW
wire
Position A
in the 3 position DEUTSCH connector
ORANGE
wire
Position B
in the 3 position DEUTSCH connector
BLUE
wire
Position C
in the 3 position DEUTSCH connector
Connect to Brake, Tail-Turn Signal Light in Remote Head.
GREEN
wire
Position A
in the 3 position DEUTSCH connector
BROWN
wire
Position C
in the 3 position DEUTSCH connector
Connect to Back-Up Light in Remote Head.
VIOLET
wire
Auxiliary Wire
