Page 2
Swivel Mount
AVBKT4
Rear View Mirror Mount
AVBKT1
AVBKT2 (shown)
Note: This bracket
may be mounted in
either style shown
to allow the light to
slide onto the front or
rear of the visor.
Use the mounting
holes that fit your
application.
NOTE: This bracket
comes with self
drilling screws.
For these, you
will use the large
mounting holes.
Headliner Mount
AVBKT5D (shown)
AVBKT5S
Visor Clip Mount
AVBKT3S
AVBKT3D (shown)
TLNBKT?
ROOF SUPPORT BEAM
ROOF
HEADLINER
IMPORTANT: Confirm that the mounting
screws are not in front of any openings
in the roof support beam.
WINDSHIELD
NOTE: Dual Avenger II shown for example.
6 - 32 X 5/16
WHIZ LOCK
NUT (4)
10 - 24 ELASTIC
STOP NUT (4)
10 - 24 1" PHILLIPS
PAN HEAD MACHINE
SCREW (4)
6 X 3/8 PHILLIPS
PAN HEAD PLASTI
LOK SCREW (2)
.280 ID X 1.25 OD
FLAT WASHER (4)
Use #8 Sheet Metal Screws (customer
supplied) of appropriate length to
secure bracket to headliner
area. Either pair of the
mounting slots
may be used
IMPORTANT:
If mounting this product requires drilling
holes, the installer MUST be sure that no vehicle
components or other vital parts could be damaged by the
drilling process. Check both sides of the mounting surface before drilling begins.
Also de-burr the holes and remove any metal shards or remnants. Install grommets into all wire
passage holes.
WARNING: Do not install this product or route any wires in the deployment area of your air bag.
Equipment mounted or located in the air bag deployment area will damage or reduce the
effectiveness of the air bag, or become a projectile that could cause serious personal injury or
death. Refer to your vehicle owners manual for the air bag deployment area. The User/Installer
assumes full responsibility to determine proper mounting location, based on providing
ultimate safety to all passengers inside the vehicle.
FAILURE TO FOLLOW THESE SAFETY PRECAUTIONS AND INSTRUCTIONS COULD RESULT
IN DAMAGE TO THE PRODUCT OR VEHICLE AND/OR SERIOUS INJURY TO YOU AND YOUR
PASSENGERS! REFER TO THE INSTALLATION GUIDE INCLUDED WITH YOUR AVENGER™ II
FOR IMPORTANT SAFETY WARNINGS.
