P84502 C
Sheet 2 of 6
SPECIFICATIONS:
Table 1A: Sound Output Level
Sound
Level
Rated Reverberant dBA at
10 ft per UL 1480 for 0.5-V and 25-V Settings
6
84
5 82
4 77
3 75
2 71
1 69
NOTE:
See Table 3
Sound Output Level Selection
for use of settings “A” and “B”.
Power Input Voltage: 16.0 to 33.0 VDC, regulated
Current
Consumption: 120
mA
RMS
maximum
Appliance Input Level: 0.5 V RMS or 25 V RMS (Switch selectable)
Appliance Input Impedance:
0.5-V Setting:
Greater than 400 Ohms, or equivalent to less than
1/1000 W (0.001 W or 1 mW) load
25-V Setting:
Greater than 20 kOhms, or equivalent to less than
1/32 W (0.03125 W or 31.25 mW) load
Sound pressure level measurements were made at 16 VDC with audio inputs of 0.5 V RMS in the 0.5-V setting and with 25 V RMS
in the 25-V setting. Current measurements were made at 33 VDC with audio inputs of 0.5 V RMS in the 0.5-V setting and with
25 V RMS in the 25-V setting.
WARNING: THIS APPLIANCE WAS TESTED TO THE OPERATING VOLTAGE LIMITS OF 16-33 VOLTS
REGULATED POWER. DO NOT APPLY 80% AND 110% OF THESE VOLTAGE VALUES FOR SYSTEM OPERATION.
CAUTION:
The
Speaker
is not designed to be used on coded systems in which the applied voltage is cycled on and off.
SETTINGS:
The switch on the PCB (SW1) is used to select the input voltage and sound output level, see Figure 1.
Figure 1:
S W 1
1
2
3
4
SW1
1
2
3
4
ST+
ST-
+24
GND
AD+
AD-
TB1
ON
ON
