P84502 C
Sheet 1 of 6
273 Branchport Avenue
Long Branch, N.J. 07740
(800)
631-2148
Thank you for using our products.
www.wheelockinc.com
INSTALLATION INSTRUCTIONS
SUPERVISED SELF-AMPLIFIED SPEAKER
Use this product according to this instruction manual. Please keep this instruction manual for future reference.
MODEL NUMBERS:
Speaker
SA-S70-R
Supervised Self-Amplified Speaker
Speaker SA-S70-W Supervised Self-Amplified Speaker
Speaker
SA-S90-R
Supervised Self-Amplified Speaker
Speaker SA-S90-W Supervised Self-Amplified Speaker
GENERAL:
The Supervised Self-Amplified Speaker provides a choice of 6 different sound output levels and operates with audio input levels of
0.5 VRMS (e.g., from Wheelock’s SALL-15S or any other 0.5V-RMS audio output source Listed for Fire Protective Signaling
Service) and 25 VRMS, all by means of selectable switch settings. The Low Profile design incorporates a high efficiency speaker for
maximum output at minimum power across a frequency range of 400Hz to 4000Hz, and features a sealed back construction for extra
protection and improved audibility. The appliance mounts onto a 4” square deep backbox with an extension ring. (See Mounting
Options.) All inputs are polarized for compatibility with standard reverse polarity supervision of circuit wiring via a Control Panel.
NOTE:
All
CAUTIONS
and
WARNINGS
are identified by the symbol
. All warnings are printed in bold capital letters.
WARNING: THE SPEAKER APPLIANCE IS A "FIRE ALARM DEVICE - DO NOT PAINT."
WARNING: PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT. THE
SUPERVISED SELF-AMPLIFIED SPEAKER MUST BE FIELD SET TO THE DESIRED SOUND OUTPUT LEVEL
BEFORE IT IS INSTALLED. THIS IS DONE BY PROPERLY ADJUSTING A FOUR-POSITION SWITCH IN
ACCORDANCE WITH THESE INSTRUCTIONS. INCORRECT SETTINGS WILL RESULT IN IMPROPER
PERFORMANCE AND MAY DAMAGE THE PRODUCT, WHICH COULD RESULT IN PROPERTY DAMAGE AND
SERIOUS INJURY OR DEATH TO YOU AND/OR OTHERS.
WARNING: CHECK THE MINIMUM AND MAXIMUM OUTPUT OF THE POWER SUPPLY AND STANDBY
BATTERY AND SUBTRACT THE VOLTAGE DROP FROM THE CIRCUIT WIRING RESISTANCE TO DETERMINE
THE APPLIED VOLTAGE TO THE APPLIANCES.
Copyright 2004 Wheelock, Inc. All rights reserved.
